Rear shock fun !
#16
Three Wheelin'
#17
Three Wheelin'
Thread Starter
![Wink](https://rennlist.com/forums/images/icons/icon12.gif)
After waiting a while for Pellican to ship the new 12m mounting bolts for the front struts, I cancelled the order and reinstalled the old hardware.
Did some height adjustments as the driver side was a lot lower than the pass. side. Took copious notes to see what moving one corner up or down did to the other corners. Also shown is my handy measure tool . It works very well.
Not an obvious pattern here, but the measurements are close enough to get an allignment done.
Corner ballance will have to wait for another time......
The ride is SO much better with new Bilsteins !!
Did some height adjustments as the driver side was a lot lower than the pass. side. Took copious notes to see what moving one corner up or down did to the other corners. Also shown is my handy measure tool . It works very well.
Not an obvious pattern here, but the measurements are close enough to get an allignment done.
Corner ballance will have to wait for another time......
The ride is SO much better with new Bilsteins !!