Anyone have a working cruise control servo motor they can part with?
08-07-2012, 07:30 PM
#1
Racer
Thread Starter
Anyone have a working cruise control servo motor they can part with?
Anyone have a working cruise control servo motor they can part with?
I know the servo unit itself is used on other models besides the 964, but hopefully someone has one with the proper mounting bracket for a 964.
Also, is the bracket in the photo below the proper bracket for a 964? It was pulled from a 993, not sure what year 993 though.
Let me know please...
Thanks
Derek
I know the servo unit itself is used on other models besides the 964, but hopefully someone has one with the proper mounting bracket for a 964.
Also, is the bracket in the photo below the proper bracket for a 964? It was pulled from a 993, not sure what year 993 though.
Let me know please...
Thanks
Derek
Last edited by dkcaims; 08-07-2012 at 10:43 PM.
08-08-2012, 02:19 PM
#2
Rennlist Member
I'm not sure if that bracket will fit on a 964. In looking for pics of a 964 CC I saw this...
http://www.einmaligparts.com/Support9_p_153084.html#
It shows a stamped steel bracket for the 964 ( pic taken from the PET) , not cast aluminum
The PET has the servo as 944 617 199 00, with the 2 pcs. bracket as 964 617 199 00, and 964 617 028 00.
When searching the forum for more info I saw this from the 993 board>>>
https://rennlist.com/forums/9537373-post1.html
He's recently removed his CC and might be willing to sell it to you if still available.
http://www.einmaligparts.com/Support9_p_153084.html#
It shows a stamped steel bracket for the 964 ( pic taken from the PET) , not cast aluminum
The PET has the servo as 944 617 199 00, with the 2 pcs. bracket as 964 617 199 00, and 964 617 028 00.
When searching the forum for more info I saw this from the 993 board>>>
https://rennlist.com/forums/9537373-post1.html
He's recently removed his CC and might be willing to sell it to you if still available.
