Who has the coolest wheels/ride height on their 964?
10-17-2020, 01:36 AM
#827
Rennlist Member
thanks! Yeah the black gives the car some attitude. I had BulletProof Coating do the powder coat color change. It was $75 a wheel to do 17s.
Changing to black gives your car a sinister look, I like it! Who did the refinishing and what kind of cost?
10-19-2020, 03:23 AM
#828
Love seeing all these beautiful 964s. Here’s my Slate Grey Metallic 964 3.8L C4. For those of you on IG, my user name is @modificaclassica
Last edited by ModQuench; 10-19-2020 at 03:24 AM.
The following 11 users liked this post by ModQuench:
911Jetta (10-19-2020),
964Luftballoon (10-19-2020),
Finlander (10-19-2020),
Greg Wolfe (10-19-2020),
heliolps2 (10-19-2020),
and 6 others liked this post.
10-19-2020, 11:08 AM
#830
Rennlist Member
Nice touches all around @modificaclassica
10-19-2020, 03:59 PM
#832
Pretty happy with it as it sits. Still need to put some LED H4 lights in and fix some of the rust issues. None of those are ride height/wheel concerns, though.
Last edited by F/51 LRS; 10-19-2020 at 04:00 PM.
The following 3 users liked this post by F/51 LRS:
The following 3 users liked this post by HiWind:
The following 5 users liked this post by Greg Wolfe:
911Jetta (10-19-2020),
964Luftballoon (10-19-2020),
F/51 LRS (10-19-2020),
Finlander (10-19-2020),
HiWind (10-19-2020)
The following users liked this post:
Derek RS (10-21-2020)
10-21-2020, 12:14 PM
#840
Rennlist Member
Sure thing. I have not installed the wheels and driven yet, so don't consider this the perfect fitment. From first glance, it appears I will need to add some spacers to the front. I will have much better information once I have the wheels mounted and drive the car. I will say that my current setup is as follows:
18x9.5 et48 and 18x12 et10 (with 10mm rear spacers)
Mr. Wolfe
18x9.5 et48 and 18x12 et10 (with 10mm rear spacers)
Mr. Wolfe