AWD slave cylinder(lateral)
#1
Race Car
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Anyone have a good source($$$)
Anyone have success rebuilding it?
Any help/hints would be great!
Dwane
Anyone have success rebuilding it?
Any help/hints would be great!
Dwane
Last edited by Dwane; 07-11-2011 at 02:21 PM.
#4
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
There were a couple of folks on here (Garrett and KGorman) who explored rebuilding the PDAS slave cylinders, but without success. A search should find their threads, complete with pictures of the disassembled units and the oddball seals inside. I would still think that a shop specializing in hydraulic cylinder repairs could tackle the job. I had the same leaking failure (drips of ATE blue fluid on the garage floor), and bought a used unit from DC Automotive for about $100-125 1-2 years ago (signs that the mind is failing, or signs that I refuse to keep records of how much I spend on this thing). I also bought the replacement short hard line going into the slave cylinder, because the flare fitting was frozen to the tubing and twisted off the line. Good Luck.