Opinions on this 3.8 engine?
04-30-2011, 12:10 PM
#1
Three Wheelin'
Thread Starter
Opinions on this 3.8 engine?
http://cgi.ebay.com/ebaymotors/Porsc...#ht_499wt_1183
Excellent condition 3.8L engine with Holcombe high butterfly individual throttle bodies and DTA programable ECU. This is a turn key, bolt in, mapped and dyno'd engine for a 964/ 993 Porsche making 350hp at the flywheel on 92 octane.
The engine was built by Bob Holcombe with Mode Inc in Scottsdale and has less then 40 hrs on it.
964 3.8L Engine/ Mahle 102mm RSR Forged Pistons/ Carrilo Rods/ Mil Spec Wiring Harness/ Custom Stainless Headers and Muffler with Heat/ Heavy Springs and Titanium Retainers
$26.5K
Excellent condition 3.8L engine with Holcombe high butterfly individual throttle bodies and DTA programable ECU. This is a turn key, bolt in, mapped and dyno'd engine for a 964/ 993 Porsche making 350hp at the flywheel on 92 octane.
The engine was built by Bob Holcombe with Mode Inc in Scottsdale and has less then 40 hrs on it.
964 3.8L Engine/ Mahle 102mm RSR Forged Pistons/ Carrilo Rods/ Mil Spec Wiring Harness/ Custom Stainless Headers and Muffler with Heat/ Heavy Springs and Titanium Retainers
$26.5K
Last edited by etom; 04-30-2011 at 02:47 PM. Reason: pic added
04-30-2011, 12:27 PM
#2
Nordschleife Master
Join Date: Feb 2011
Location: Deep Downtown Carrier, OK
Posts: 5,297
Likes: 0
Received 6 Likes
on
6 Posts
The guys in Tualatin wouldn't put anything on their site if it wasn't top shelf.
If you want it/need it/can't live without it, call Jeff or Earl and pull the trigger!
If you want it/need it/can't live without it, call Jeff or Earl and pull the trigger!
