964 RS calipers on a 964C4, bolt on?
04-28-2011 | 05:31 PM
#1
Thread Starter
Racer
Joined: Jun 2010
Posts: 384
Likes: 0
From: www.cagedcar.com
964 RS calipers on a 964C4, bolt on?
Hi, i have a friend who has a 964C4 and has just bought a set of 964RS calipers.
Can anyone tell me what is needed to make them fit?
Many thanks
Lee
Can anyone tell me what is needed to make them fit?
Many thanks
Lee
04-28-2011 | 06:30 PM
#2
Addict
Rennlist Member
Rennlist Member
Joined: May 2001
Posts: 12,411
Likes: 596
1) caliper adapters a) for 964 one piece 322x32 rotors b) for 993 322x32 2 piece rotors
2) 964RS or 964t uprights and 964 322x32 rotors
3)a) 993 uprights and 993 322x32rotors b) 993RS uprights & tierod ends and 993 322x32 rotors(optionally use Girodisk 322x32 floating rotors)
all of the above will want 993 rear calipers(not 993RS or tt), these are the same as was used on the 964RS, optionally use 968M030 rear rotors.
04-28-2011 | 06:36 PM
#3
Thread Starter
Racer
Joined: Jun 2010
Posts: 384
Likes: 0
From: www.cagedcar.com
three basic ways to do it, each has some possible variants
1) caliper adapters a) for 964 one piece 322x32 rotors b) for 993 322x32 2 piece rotors
2) 964RS or 964t uprights and 964 322x32 rotors
3)a) 993 uprights and 993 322x32rotors b) 993RS uprights & tierod ends and 993 322x32 rotors(optionally use Girodisk 322x32 floating rotors)
all of the above will want 993 rear calipers(not 993RS or tt), these are the same as was used on the 964RS, optionally use 968M030 rear rotors.
1) caliper adapters a) for 964 one piece 322x32 rotors b) for 993 322x32 2 piece rotors
2) 964RS or 964t uprights and 964 322x32 rotors
3)a) 993 uprights and 993 322x32rotors b) 993RS uprights & tierod ends and 993 322x32 rotors(optionally use Girodisk 322x32 floating rotors)
all of the above will want 993 rear calipers(not 993RS or tt), these are the same as was used on the 964RS, optionally use 968M030 rear rotors.
Much appreciated!
Lee
