Targa Top Repair
03-26-2011 | 12:09 PM
#1
Thread Starter
Instructor
Joined: Jan 2008
Posts: 131
Likes: 0
From: Maryland
Targa Top Repair
Without the embarassing details! i managed to drop my Targa top ('92 964) while removing it - the vinyl is fine, but, one of the folding arms broke clean apart
Anyone know if this type of metal (aluminum?) can be welded, or am I up against purchasing an entire new frame?
Thanks!
Anyone know if this type of metal (aluminum?) can be welded, or am I up against purchasing an entire new frame?
Thanks!
03-26-2011 | 12:43 PM
#2
Burning Brakes
Joined: Jan 2011
Posts: 1,234
Likes: 18
From: chin on taint
Ouch! I feel your pain!
I have seen parts available on fleabay and there is some guy who repeatedly lists liners, etc as "information" that you should not attempt to diy...you might try contacting one of those types, DC auto, LA Dismantler, OK foreign to see what they can come up with
I dont know if it can be welded ...if it can its gonna have to be taken apart anyhow
I have seen parts available on fleabay and there is some guy who repeatedly lists liners, etc as "information" that you should not attempt to diy...you might try contacting one of those types, DC auto, LA Dismantler, OK foreign to see what they can come up with
I dont know if it can be welded ...if it can its gonna have to be taken apart anyhow
03-26-2011 | 02:51 PM
#3
Three Wheelin'
Joined: Apr 2006
Posts: 1,926
Likes: 5
From: Seattle xburb - I can't see the Emerald City, but I know it's out there somewhere
http://www.carsinc-nj.com/
This guy is the Targa Top Guru. He might be able to tell you what you need and where to get it, and he's not too far away from you - he might be able to just fix it for you.
This guy is the Targa Top Guru. He might be able to tell you what you need and where to get it, and he's not too far away from you - he might be able to just fix it for you.
