Zuffenhaus Fuchs in DC Area
#1
Racer
Thread Starter
Join Date: Apr 2008
Location: Silver Spring, MD
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Zuffenhaus Fuchs in DC Area
I am very interested in the Zuffenhaus Fuchs 17's. Standard finish. Does anyone in the greater Washington DC metro area have a set installed that I could look at before buying? Not cheap at $3250, so I'd like to see first if I could. Thanks much!
#3
Racer
Thread Starter
Join Date: Apr 2008
Location: Silver Spring, MD
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
#4
#5
To me, it is very difficult, unless know the seller, to buy wheels without knowing the history, whether they are true, repaired, or not. Especially if tracking the car . Maybe jaded cause was burned once as wheels looked fine with a visual inspection, but were in poor "round" shape. In fairness, I don't think the owner knew much either as there are too many potholes and get damaged without knowing, sometimes.
#6
Racer
Thread Starter
Join Date: Apr 2008
Location: Silver Spring, MD
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
As a matter of fact, I made another visit to my car today. Engine is about ready to go back in. In case anyone does the chronology from day one, please don't ask. Yes, I went the LN Engineering route for 3.8L (103's actually). A few fuzzy pic's below. I am counting down the days now....