Anyone made a complete US ->Europe(Sweden) light conversion
#1
Rennlist Member
Thread Starter
Anyone made a complete US ->Europe(Sweden) light conversion
Hi All,
Im in the middle of doing a US to Europe light conversion. Anyone here done it?
I would like to double check my work. If any here with that experience, input please..
I will get back wih a DIY....
/Felix
Im in the middle of doing a US to Europe light conversion. Anyone here done it?
I would like to double check my work. If any here with that experience, input please..
I will get back wih a DIY....
/Felix
#2
I have not yet done the conversion, but have purchased a kit (some time ago) from Daniel Stern. There is some information on his site (Daniel Stern Lighting) that may be useful to you.
#3
Rennlist Member
Thread Starter
Sorry.
Steps.
1. Euro side turn indicators. drill holes an connect wires.
2. Side US lights re-connect, lights behind US turn indicator, pull light buld, draw wires through the existing holes behind the headlights and drill hole in the reflector to fasten socket for it.
3. Cut one of the wires to the turnsignal to get it to be permanent turn signal only.
Steps.
1. Euro side turn indicators. drill holes an connect wires.
2. Side US lights re-connect, lights behind US turn indicator, pull light buld, draw wires through the existing holes behind the headlights and drill hole in the reflector to fasten socket for it.
3. Cut one of the wires to the turnsignal to get it to be permanent turn signal only.