wheel offset again
Thread Starter
Instructor
Joined: Nov 2007
Posts: 116
Likes: 0
From: Victoria Australia
wheel offset again
For the life of me I can not work out the off-set for wheels,so can you help me out, will 18by8 et of50/18by10 et of52 fit my 91/c2 and if they do what size tryes would you suggest i was thinking of trying summito HTZ III in 225/45/zr18 front and 265/40r18 on the rear cheers
Three Wheelin'
Joined: Dec 2003
Posts: 1,632
Likes: 2
From: Milton Keynes, UK
My guess is that the ET52 rear will be mighty close to the oil pipe in the right rear wheel well and you should check it carefully before any serious driving. I'd be very tempted to put a 5mm spacer on the rears just to be sure of the clearance. Cars do seem to vary a little so it's worth the check first.
Ilko is spot on with the tyre sizes.
Regards
Dave
Ilko is spot on with the tyre sizes.
Regards
Dave
Rennlist Member
Joined: Oct 2003
Posts: 1,553
Likes: 51
From: PA
Check out this website: http://www.rims-n-tires.com/rt_specs.jsp It's the best I've seen yet in helping one figure out offsets.
