Notices
964 Forum 1989-1994
Sponsored by:
Sponsored by:

distributor drive belt vent kit - how to tell

Thread Tools
 
Search this Thread
 
Old 10-25-2008 | 10:02 PM
  #1  
jsrieck's Avatar
jsrieck
Thread Starter
Intermediate
 
Joined: Jul 2006
Posts: 37
Likes: 0
Default distributor drive belt vent kit - how to tell

How can I tell if a distributor drive belt vent kit has been installed?
Old 10-25-2008 | 10:20 PM
  #2  
LouZ's Avatar
LouZ
Addict
Rennlist Member

 
Joined: Oct 2002
Posts: 4,009
Likes: 22
From: Philly Area ----- George Washington took a dump in my backyard!
Default

Look for a plastic tube that runs from the heater blower tube ( large black duct from front to back on left side of engine) to the metal housing of the dizzy (connection about 1" below the dizzy cap).
Old 10-25-2008 | 11:41 PM
  #3  
911URGE's Avatar
911URGE
Rennlist Member
 
Joined: Apr 2006
Posts: 1,770
Likes: 105
From: The 909, CA
Default

Here is a visual from a fellow RL member jjbunn

Idiots Guide to the 964 Engine Compartment

Look at the lower left of the image
Old 10-26-2008 | 01:50 AM
  #4  
jsrieck's Avatar
jsrieck
Thread Starter
Intermediate
 
Joined: Jul 2006
Posts: 37
Likes: 0
Default

Thanks y'all. The picture is REALLY helpful.



Quick Reply: distributor drive belt vent kit - how to tell



All times are GMT -3. The time now is 09:26 PM.