Turn That Frown Upside Down
#1
Rennlist Member
Thread Starter
Turn That Frown Upside Down
I know others have done this but it came out soooo good I had to share.
Before....What an ugly frown
After....My 964 is much happier
Thanks to Rennlist and Adrian's 964 book this took about 2 hours to fix. I noticed that the black grill that sits behind the lower spoiler was not fully clipped in place. There are little clips on the spoiler that hook into the grill around the periphery. Getting that clipped in place properly solved 50% of the frown.
Before....What an ugly frown
After....My 964 is much happier
Thanks to Rennlist and Adrian's 964 book this took about 2 hours to fix. I noticed that the black grill that sits behind the lower spoiler was not fully clipped in place. There are little clips on the spoiler that hook into the grill around the periphery. Getting that clipped in place properly solved 50% of the frown.
#4
Rennlist Member
Thread Starter
#5
Instructor
Join Date: Feb 2005
Location: Raleigh, NC
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
As much of a PITA as it is, at least it bends instead of breaks... I think I need to adjust my tabs... the frown isn't nearly as bad as your "before" shot, but I don't think it's straight, either.