Broken Key in Ignition
#1
Instructor
Thread Starter
Join Date: Apr 2004
Location: Pismo Beach,California
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Broken Key in Ignition
HAD TO PASS THIS ON......Broke the key at the hilt tried picking tools crazy glue... Read all threads for this problem found no results....only suggestions...Long story short... I used Tri-flow superior lubricant....then used two Sewing Machine Needles....one on each side in the key slots at an angle pressing then pulling outward....out she came ...... Jim
#3
Instructor
Thread Starter
Join Date: Apr 2004
Location: Pismo Beach,California
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
John....Just turned the Key to start and snap.....It broke......Have to mention....had a 1990 300 ZX TT....the key for it was made out of Titanium.....super strong......
Jim
Jim
#4
Racer
Join Date: Sep 2002
Location: Prather, California: somewhere in the middle of the State
Posts: 293
Likes: 0
Received 1 Like
on
1 Post
Kinda remind's me of a dark and stormy night in Virginia Beach and the same thing happened to my 912. I was 300 miles from home and had to walk two miles to my hotel room. Wet, cold and really pissed. I returned the next day and fished it out with the tweasers from my swiss army knife. Hitched to a Porsche dealer and had a new one made from the ssn. I learned to watch the wear on any car key.