nekbet

I found this thread - https://rennlist.com/forums/964-forum/21029-receiver-drier-for-134a-conversion.html

But the link within wont open up... That thread # is a 911 wheel spacer question..

Anyone have a part number for the Honda AC Receiver/Drier part? The part I got from Advance Auto had fittings 180 degrees from each other, whereas the one I took out has them 90 degrees of each other.

Cheers,

Mike
1990 964 C4 Targa

MarkD

EDIT: I see what you were saying, yeah that link is odd.

I searched on "Honda Dryer" and got this one: https://rennlist.com/forums/showthre...ferrerid=35947

JasonAndreas

ACH 33278 (the broken link)

gfunk

Try a 4-seasons #R1040-89421 available from Auto Parts Warehouse. It has the fittings at 90 degrees. I used it in an '89 C4.

http://replacement.autopartswarehous...Drier&dp=false

DaveK

I also used 4-seasons. In fact, I had some problems with it because the stickers on it suggested that the flow was in the wrong direction but I eventually proved that the sticker was wrong and the part was fine. 4-Seasons were very helpful at the time.

nekbet

Awesome.. Went to Advance Auto and said I needed one for the 89 Civic DX.. Brought it out and it looked right. Much more right than the one their website said was for the car in the first place (in-out fittings in wrong location).
The 33278 part number is it...

Installed it this morning.. filled with R-134A...cold AC now. Cool!

Mike
1990 964 C4 Targa