Gauge Trim rings
#1
Racer
Thread Starter
Join Date: Aug 2001
Location: Jersey, UK
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Gauge Trim rings
Hi
First question whats the best tool to remove and put the trim rings back on.
Second question, i was going to spring for a new set of alloy or aluminium trim rings but then it occurred to me, what are the existing ones made of and could they be sanded and polished then replaced.
All coments welcome.
Rob
91 964 Cab
Jersey, UK
First question whats the best tool to remove and put the trim rings back on.
Second question, i was going to spring for a new set of alloy or aluminium trim rings but then it occurred to me, what are the existing ones made of and could they be sanded and polished then replaced.
All coments welcome.
Rob
91 964 Cab
Jersey, UK
#2
Addict
Rennlist Member
Rennlist Member
The only ones I've seen are glue on types that sit on top of the original bezel. I'm afraid they'd pop off at a track event.
To remove, take a look at the tech section at <a href="http://www.pelicanparts.com." target="_blank">http://www.pelicanparts.com.</a> One of the Rennlisters, Tom Sharpes, has documented the gauge replacement process and includes tool recommendations and photos.
To remove, take a look at the tech section at <a href="http://www.pelicanparts.com." target="_blank">http://www.pelicanparts.com.</a> One of the Rennlisters, Tom Sharpes, has documented the gauge replacement process and includes tool recommendations and photos.