Anyone installed Motec?
02-12-2005, 03:36 PM
#16
Skippy
Rennlist Member
Rennlist Member
Okay Tony. Tx for bringing light into the darkness. I went through a lot of threads via the search function. When I read "Eaton" I made the link to the XJR which I nearly bought a few months back. FWIW AJ6 Engineering in Cheshire http://www.jagweb.com/aj6eng have some good reading on superchargers.
04-21-2005, 07:41 PM
#18
Super Duper Moderator
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally Posted by tonytaylor
9M will fit the TPC supercharger ( there's a quite a few posts in the archives if you do a search, especially 993 forum).
Marc
04-21-2005, 07:53 PM
#19
Burning Brakes
Join Date: Mar 2002
Location: WhippetWorld, .........is it really only this many
Posts: 1,081
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by Marc Shaw
Anyone know of a North American (or even better, Canadian) source for this conversion?
Marc
Marc
04-29-2005, 10:37 PM
#21
Instructor
Join Date: Mar 2005
Location: Pittsburgh, PA Area
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
I am new to Rennlist and have been reading a lot of posts. Just bought a 90 C2, H&R lowering springs, LWF and Fabspeed muffler. I am thinking of an ECU upgrade and possible MAF conversion. I was looking at Authority but understand they are out of business. What do you recommend for street use with some extra power and drivability. Thanks for the advice.
04-30-2005, 01:58 AM
#22
Jarhead
Rennlist Member
Rennlist Member
I would bypass the Autothority option, if you haven't already decided to do that. I have one, and while I love it, God forbid anything ever go wrong with it because the support they offered me was laughable at best. And that was just to get a wiring harness for the darn thing!
Brian
Brian
04-30-2005, 12:12 PM
#23
Instructor
Join Date: Mar 2005
Location: Pittsburgh, PA Area
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Chip upgrade advice needed!!!!
Thanks for the advice on Authority. I can't get them to answer the phone so maybe they are DOA. Does anyone have a chip recommendation for a 1990 C2 with LWF and Fabspeed dual exhaust? Thanks for the advice
04-30-2005, 01:09 PM
#24
When considering a chip for a 964, check out this web site ( www.andial.com )
on the FAQ page under Question #2. It's most applicable to a 964 with knock
sensors. Andial was/is Porsche Racing USA and developed engines for Le Mans
& Cup Cars.
on the FAQ page under Question #2. It's most applicable to a 964 with knock
sensors. Andial was/is Porsche Racing USA and developed engines for Le Mans
& Cup Cars.
05-17-2005, 10:39 PM
#25
Instructor
Join Date: Mar 2005
Location: Pittsburgh, PA Area
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
I did get a old of Autothority and purchased a chip for LWF and aftermarket exhaust. Installed it and it definately helped idle, slightly hgiher, and it seems to pull stronger.
