Need new icon ...
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
Need new icon ...
Ok, it's time to leave the 993 icon behind and change to the Turtle. Which photo do you folks like best?
Number 1
Number 2
Number 3
Number 4
or Number 5?
Number 1
Number 2
Number 3
Number 4
or Number 5?
#7
Rennlist Member
Great photo's Tom...I'd have to vote for #3
Trending Topics
#9
Addict
Rennlist Member
Rennlist Member
Thread Starter
Thanks for the input. I think I'll try a couple of options over the next few weeks. I'm most partial to 3 or 4 for an avatar (but I like #2 for the fun of it).
The Turtle is Amazon Green and is stock except for the JIC Cross 15 position adjustable suspension (springs at about 600/800) with monoballs/camber plates, the stealthly big red upgrade in black (rotors and calipers) with Pagid orange pads, lightweight carpet, rear seats removed, RS door panels, Safety Devices Cage, TRG adjustable sway bars (25/22 mm), secondary bypass, heater fan removed and cup bypass pipe added, no radio or speakers, no AC, cargraphic secondary oil cooler, Recaro Pole Position seats, Scroth 6-pt harnesses, full fire supression system, RSA tail and decklid from MA Shaw, a strut tower brace, momo GT3RS steering wheel, a Rennline pedal set, MPSC rubber (205/255) on Cup II wheels, and other minor odds and ends. All it needs is someone with the ability to actually drive it at its limits and I'm working on that.
The Turtle is Amazon Green and is stock except for the JIC Cross 15 position adjustable suspension (springs at about 600/800) with monoballs/camber plates, the stealthly big red upgrade in black (rotors and calipers) with Pagid orange pads, lightweight carpet, rear seats removed, RS door panels, Safety Devices Cage, TRG adjustable sway bars (25/22 mm), secondary bypass, heater fan removed and cup bypass pipe added, no radio or speakers, no AC, cargraphic secondary oil cooler, Recaro Pole Position seats, Scroth 6-pt harnesses, full fire supression system, RSA tail and decklid from MA Shaw, a strut tower brace, momo GT3RS steering wheel, a Rennline pedal set, MPSC rubber (205/255) on Cup II wheels, and other minor odds and ends. All it needs is someone with the ability to actually drive it at its limits and I'm working on that.
Last edited by Tom W; 04-22-2004 at 01:31 AM.