Numeric Racing Short Shifter
The following users liked this post:
Hem (07-05-2021)
#32
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Sadly, this shifter will not work for any 4 wheel drive. Doesn't mean we won't ever make one though!
The following users liked this post:
Ruskiedog (10-31-2021)
#33
I definitely need this, I feel its only a matter of time before I money shift going into 3rd
can I use the stock shifter boot and **** for this?
can I use the stock shifter boot and **** for this?
#34
Rennlist Member
The following users liked this post:
Numeric Racing (07-06-2021)
#35
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Good news! Pre-Order for all 2WD 993/964s will be live tomorrow around mid-day! Expect about a 5-7 week delivery time. We are hopeful for 4-5 but 7 at the latest. We are stoked and excited for you guys to get your hands on this game changer! We appreciate the support and you guys will not be disappointed! Once it is live I will post the direct link to the page in this thread!
Last edited by Numeric Racing; 07-06-2021 at 06:40 PM.
The following users liked this post:
JP-"S" (11-13-2021)
#37
Rennlist Member
#38
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Lock in your Pre-Order Purchase here:
https://store.numericracing.com/coll...3-transmission
We appreciate all of your support! We have put in a ton of work on this and we are excited to get these out to you guys!
The following users liked this post:
Numeric Racing (07-07-2021)
#41
#43
Rennlist Member
What's the additional effort like when using the shifter? One of my peeves about some aftermarket shifters is how the effort required to execute shifts can be dramatically increased and/or effort is not linear between gears. I completely understand that the effort may go up due to changes in leverage, pivot points, etc. but just wanted to see if the additional effort can be quantified/measured or compared to other aftermarket shifter options.
Thanks!
Thanks!
The following users liked this post:
RichardA (07-07-2021)