Help ID correct application of Carrillo rods with crank and P&C's combo
#1
Help ID correct application of Carrillo rods with crank and P&C's combo
Hello engine builders...
I am helping a friend who inherited a bunch car stuff and other random man cave stuff he will start to unload.
One lot is a new set of ARP head bolts, ARP rod bolts, and Carrillo rods. I was thinking of picking up the lot, but don't think they will work my 993 crank.
Here is the spec of the Rods
Carrillo
P/n PR>-RSR-65000H
Spec in inches printed on side of box
Piston end bore .9067
Piston end thickness .7680
Crank end bore 2.2840
Crank end thickness .8560
From my research the Carrillo rods in hand are for a 964 crank and I think (do not know exactly) for 993 P&C's... I'm going to have him drive up to Carrillo in Irvine and have them inspect the rods. Before he does, thought I ask here.
Am I right?
Thanks
I am helping a friend who inherited a bunch car stuff and other random man cave stuff he will start to unload.
One lot is a new set of ARP head bolts, ARP rod bolts, and Carrillo rods. I was thinking of picking up the lot, but don't think they will work my 993 crank.
Here is the spec of the Rods
Carrillo
P/n PR>-RSR-65000H
Spec in inches printed on side of box
Piston end bore .9067
Piston end thickness .7680
Crank end bore 2.2840
Crank end thickness .8560
From my research the Carrillo rods in hand are for a 964 crank and I think (do not know exactly) for 993 P&C's... I'm going to have him drive up to Carrillo in Irvine and have them inspect the rods. Before he does, thought I ask here.
Am I right?
Thanks
Last edited by samurai_k; 07-12-2020 at 02:44 PM.