rotorheadcase

G'day all, looking for some advice and info regarding the 3 piece rims that came fitted to the 964 turbo.

Front 8 x 18 Part Number PO-96536213600;
Rear 10 x 18 Part Number PO-96536214000.

Were they all made by Speedline and did they all come etched with "Speedline for Porsche" on the outer lip? What are the relative merits of these over a BBS 3 piece rim or a forged monobloc rim. Are they particularly light? Looking at a set for my C4 so any advice appreciated regards to fitment and suitability.
Thanks,

​​​​​​Neil

cobalt

All made by speedline with etching . Very valuable new will run you north of $10k. Heavy in general around 25 26 pounds. Best looking wheel IMO but I prefer a light weight BBS for driving on my C2.

Whitezulu

I can only confirm, i bought a new set directly from Porsche, they are available with polished center or painted center,
They come with speedline for porsche etching and are heavier then bbs or forged monobloc wheels

farisad

one of the best looking wheels if you can fit them. i have c2 and not possible to fit them

cobalt

I run these sizes on my C2 all the time. Both my speedlines and a set of fikse's made to the same width and offsets.