kyle951

Does anyone know what the proper hardware was for the rear valance on the 944 turbo cars. I am missing a few on my car and would like to replace with the correct hardware.


Thanks,
Kyle

rlm328

Try this

kyle951

Thank you, Bob.

that shows me what I need.

944SRay

Does anyone have any type of measurements and/or templates to install the rear valance?

MAGK944

944SRay

I purchased it from a private seller online.

Dan Martinic

This might also be helpful: https://www.porscheatlantaperimeterparts.com/showAssembly.aspx?ukey_assembly=476752&ukey_make=1058&ukey_model=15414&u key_category=20116

gruhsy

Adding to the hardware question. Has anyone ever done a repair to the studs on part 9 or 10 on the list? One of the 4 studs on the "winged rear embellisher" broke off when I removed it from the car. The nut was seized on......had been spraying penetrating solvent on it for weeks first but the stud was too weak from corrosion.
I was thinking of machining it out at work and epoxying in a new stud.

wicks

lincolnturns

For future reference 944online.com sells the mounting hardware as a complete kit. The square nut-sert things took me forever to figure out how to seat correctly and ended up breaking the tabs off of one until it "hit me".