gruhsy

How significant is the big end width on the Eagle 4G63 rods for offset grind?

The place parts were ordered from messed up and sent Eagle CRS5900MB3D rods with a with of 1.038 inches.

Eagle CRS5900MC3D rods have a width of 1.1170 inches.

The rods are 2mm thinner so 1mm different on each side.

Is this going to be a serious issue?

Thanks.


.

gruhsy

remembered reading this and finally found the thread

https://rennlist.com/forums/944-turb...-guide-13.html

Still if anyone has thoughts or results etc for future reference.

gruhsy

Just got an e-mail reply from Michael Mount.

He advised to get the wider Eagle rod.

future reference advice for anyone doing an offset grind.