Hinton'a Hybrid Stroker
#76
Not quite everything, but pretty close! I'm not running a PS pump so the paint on those studs was on purpose. Any mating flange (intake, exhaust, oil filter, etc) or exposed holes were taped and covered before painting.
Going with a wrinkle finish red for the cam cover and black for the pulley's and ancillary bits.
Going with a wrinkle finish red for the cam cover and black for the pulley's and ancillary bits.
#77
Well, I'm sure that each type of welding work needs its own type of electrode. Some welders are sure that separate welding machines are required for different jobs, but I think this is already for too high-quality work that professionals do. I think if you are going to do some responsible and painstaking work on welding, then you should consult with a qualified welder about the choice of equipment or ask a question on a forum dedicated to welding. I Googled and found this: https://weldingnearyou.com/faqs /. Maybe something like this will help you. But I think if you are not a professional, it is better not to take risks and call professional welders.