Tial SS HTA G35 .82 turbo review
#31
Freedom Enthusiast
Rennlist Member
Rennlist Member
I'm trying to make sure I have all of the correct info.
Tial SS HTA G35 .82
Garrett G3582 CHRA DBB center with a Tial HTA wheel?
.82 Tial SS turbine housing with T4 inlet and v-band outlet?
Any other specs I am missing?
Tial SS HTA G35 .82
Garrett G3582 CHRA DBB center with a Tial HTA wheel?
.82 Tial SS turbine housing with T4 inlet and v-band outlet?
Any other specs I am missing?
#32
Rennlist Member
I don't know if an EFR would fit on a 951, but they are putting out some miraculous curves.
2.2L Audi AAN I5 with an EFR 6758. Virtually the same spool as a K24, but with double the HP potential
Same 2.2L engines with a EFR 7163 against a billet K26
2.5L Audi TTRS I5 with EFR 7163 on 91oct
2.2L Audi AAN I5 with an EFR 6758. Virtually the same spool as a K24, but with double the HP potential
Same 2.2L engines with a EFR 7163 against a billet K26
2.5L Audi TTRS I5 with EFR 7163 on 91oct
#33
Rennlist Member
Worth checking out this very good build showing an EFR turbo installation on one of our cars.
http://forums.tipec.net/viewtopic.php?f=25&t=17459
http://forums.tipec.net/viewtopic.php?f=25&t=17459
#34
Drifting
Thread Starter
#35
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Join Date: May 2001
Location: Hotlanta - NE of the Perimeter
Posts: 12,269
Received 266 Likes
on
153 Posts
Thanks AZBANKS for capturing the details. Had me wondering as well.
Looks like a nice setup - seems to be a perfect match for the 3L motors and with maintenance in mind.
George D - if there is any other information that you could share, it would be greatly appreciated. Sounds like this is a very promising setup.
Looks like a nice setup - seems to be a perfect match for the 3L motors and with maintenance in mind.
George D - if there is any other information that you could share, it would be greatly appreciated. Sounds like this is a very promising setup.
#37
Race Director
I think its more about the head flow, LOTS of F20C guys use the GT3582R and bigger and have amazing results.
#39
Rennlist Member
#42
Professional Hoon
Rennlist Member
Rennlist Member
Join Date: Jan 2010
Location: Melbourne, Australia
Posts: 7,090
Likes: 0
Received 4 Likes
on
4 Posts
my friend has a k20 with a gt3076 ,63 and gets full boost at 4k or just over. but he can rev till 11k so that doesn't bother him. and gear ratios are shorter. so he still has a decent powerband.
#43
Freedom Enthusiast
Rennlist Member
Rennlist Member
#44
Professional Hoon
Rennlist Member
Rennlist Member
Join Date: Jan 2010
Location: Melbourne, Australia
Posts: 7,090
Likes: 0
Received 4 Likes
on
4 Posts
You can't get much different than a Garrett compressor housing (gt/x 35) HTA35 compressor wheel, Garrett DBB CHAR. GT35 turbine wheel, and a TiAL SS turbine housing.
Last edited by Paulyy; 02-24-2015 at 12:41 AM.
#45
is t3/t4 vband just a circular vband input that has the same surface area as the rectangular t4? How did you fit the turbo? i.e. downpipe, crossover pipe, and turbo mount? I'm looking at different turbo options. for my build.