The best partout you've ever seen.
#1
The best partout you've ever seen.
GUYS, If you think my prices are unreasonable, please call me on it. Its been a long time since I bought some of this stuff.[/B]
I am letting go of some of my prized Porsche parts. I think I am almost done with Porsche for the time being, and am going to try something different. I am adding pics when I can. If you want a picture of an item listed, PM me your email address and which you would like a picture of. Lots of parts are still in the car, but if I have a buyer, I will take out same day. I accept paypal only. I will email you paypal address at time of purchase conformation. Shipping will be at buyers expense.
Vitesse stage 3 turbo custom. THE GEM OF THIS LIST! TRUST ME This turbo was used on ST's 577 run before he went crazy looking for 600whp. This is the best turbo he had, and has alot of custom work not done to other stage 3's. Comes with two hot housings, one 8 and one 10. Has a small bit of lateral play, but still okay. $1500
Vitesse/SFR MAF I used SFR pipes, and vitesse sensor (much better pipe quality) chipboard(and DME), 85lb seimens[ injectors and ballast resistors. $1200
Zetronix zt2 with additional boost sensor. $175
http://i740.photobucket.com/albums/x...ps81676dde.jpg
Bilstein Escort cup coilovers front and rear. lindsey camber plates, Street valving in front, 450 front springs, 500 rear. only about 4k mikes street only. $1500
http://i740.photobucket.com/albums/x...pse54eb232.jpg
Lindsey exhaust, 3 inch downpipe, to gradulated 4 inch. No WG tie in, no cat. borla muffler. no tip. Ceramic coated, some dings here there. $850 If you bought this new from Lindsey today, it would cost $1,719.80
CEP semi solid engine mounts anoidized red new. $200
CEP AOS delete NEW with -8 fittings, MAF SFR MAF pipe with -8 AN fitting tig'd on, AND Sioku Michi catch can with -8 fittings tig'd on. Very slick setup, will include enough NEW -8 SS braided line to finish off, and fittings. $700
SFR front mount intercooler. for 968. includes hard pipes, and HKS SQQV $800
02 carrera 5 spoke lightweights (Factory) 8 and 10's Powercoated black, w matching caps, and Michilen pilot sport cups, 225 front 285 rear still good.
$1750
Recently rebuilt block with malhe motorsport light weight pistons, one mark I cannot catch nail on in cyl 2. $1600
Headers wrapped with crossover, no cracks $300
968 oil cooler fitted for 944, $200
Lindsey AC delete bracket blue, $125
Lindsey lightweight pulleys, red, crank, and alt. $150 will include belt.
I am letting go of some of my prized Porsche parts. I think I am almost done with Porsche for the time being, and am going to try something different. I am adding pics when I can. If you want a picture of an item listed, PM me your email address and which you would like a picture of. Lots of parts are still in the car, but if I have a buyer, I will take out same day. I accept paypal only. I will email you paypal address at time of purchase conformation. Shipping will be at buyers expense.
Vitesse stage 3 turbo custom. THE GEM OF THIS LIST! TRUST ME This turbo was used on ST's 577 run before he went crazy looking for 600whp. This is the best turbo he had, and has alot of custom work not done to other stage 3's. Comes with two hot housings, one 8 and one 10. Has a small bit of lateral play, but still okay. $1500
Vitesse/SFR MAF I used SFR pipes, and vitesse sensor (much better pipe quality) chipboard(and DME), 85lb seimens[ injectors and ballast resistors. $1200
Zetronix zt2 with additional boost sensor. $175
http://i740.photobucket.com/albums/x...ps81676dde.jpg
Bilstein Escort cup coilovers front and rear. lindsey camber plates, Street valving in front, 450 front springs, 500 rear. only about 4k mikes street only. $1500
http://i740.photobucket.com/albums/x...pse54eb232.jpg
Lindsey exhaust, 3 inch downpipe, to gradulated 4 inch. No WG tie in, no cat. borla muffler. no tip. Ceramic coated, some dings here there. $850 If you bought this new from Lindsey today, it would cost $1,719.80
CEP semi solid engine mounts anoidized red new. $200
CEP AOS delete NEW with -8 fittings, MAF SFR MAF pipe with -8 AN fitting tig'd on, AND Sioku Michi catch can with -8 fittings tig'd on. Very slick setup, will include enough NEW -8 SS braided line to finish off, and fittings. $700
SFR front mount intercooler. for 968. includes hard pipes, and HKS SQQV $800
02 carrera 5 spoke lightweights (Factory) 8 and 10's Powercoated black, w matching caps, and Michilen pilot sport cups, 225 front 285 rear still good.
$1750
Recently rebuilt block with malhe motorsport light weight pistons, one mark I cannot catch nail on in cyl 2. $1600
Headers wrapped with crossover, no cracks $300
968 oil cooler fitted for 944, $200
Lindsey AC delete bracket blue, $125
Lindsey lightweight pulleys, red, crank, and alt. $150 will include belt.
Last edited by hot-J; 01-30-2013 at 04:23 PM.
Trending Topics
#12
#14
No one jumped on the 10% off.........? Are you guys broke, or are my prices too high? Or both. I'm gonna just blame Obama.... *sigh*
All Packages shipped, and tracking #'s sent BTW!!!!
All Packages shipped, and tracking #'s sent BTW!!!!