Go Fast Stuff by FRF
cause I need one and Fab is outta my budget 
08-14-2012, 05:07 PM
#39
Racer
Thread Starter
Join Date: May 2011
Location: Erie Colorado
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
304 but it is a bit thicket than normal stuff. Purged and ready to go. I have one car ready in my shop that is going to get the full deal, Turbo, Intake, Headers , exhaust bla bla bla. I will post some pictures soon.
08-15-2012, 05:22 PM
#40
Rennlist Member
08-15-2012, 05:32 PM
#41
Racer
Thread Starter
Join Date: May 2011
Location: Erie Colorado
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
I am going to start a new thread now that the pictures are not in this one any longer so I will shortly. Otherwise my website is coming along nicely so you can always go to that.
03-24-2014, 09:31 PM
#42
Three Wheelin'
Join Date: Aug 2007
Location: Upton, Massachusetts
Posts: 1,417
Likes: 0
Received 0 Likes
on
0 Posts
Bumping this thread for the hell of it. Have been doing some browsing on headers, all the pictures are down in this thread and the website is no longer.
Anyone have any pictures? dnovak?
Anyone have any pictures? dnovak?
03-24-2014, 09:57 PM
#43
2nd Gear
Join Date: Jun 2010
Location: Columbia, SC
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I can personally attest to the quality of Dave's parts, and you're not going to find a nicer guy to work with. I have pictures of the set he made for me if you want to private message me. Sadly, I had a bad injector and burnt the 2.5L turbo down in January of 2013. I sold Dave's headers and exhaust, but they made the car sound wicked while it lasted. Boost built faster, the power was more linear, and did I mention the car sounded bad-***? Anyway, general rule of thumb.....check the plugs after EVERY event!!
That said, I now have a 6.0L LS2 under the hood. It sounds pretty bad-*** too, but as much as I like the power there's still something wrong about a corvette wearing a 944 shell. ;-)
That said, I now have a 6.0L LS2 under the hood. It sounds pretty bad-*** too, but as much as I like the power there's still something wrong about a corvette wearing a 944 shell. ;-)
03-24-2014, 10:32 PM
#44
Racer
Thread Starter
Join Date: May 2011
Location: Erie Colorado
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
Hi guys
Been a very long time since I logged in. I have been slammed at my day job and let some sets of headers sit to long without sending them out. Josh and I discussed a few plans of attack and looks like I will be building up an inventory before I put a new site up. Josh and I have been discussing an actual VNT Kit including turbo, pipes, controller etc. and should have it for sale by mid summer. we ended up finding an amazing VNT option that should be an amazing setup. I might make a few changes to the header design ( Longer Collector etc.) but before I put the site back up I will have an inventory for same day shipping. Also on the new site I will be offering a ready built Deck Plated block and possibly a short block, but again inventory will be key. Also look for a major build to my wide body to come, engine is in machine right now but should be one of the strongest ones yet. Again If you want to get in touch just PM me because I will be on from here on out!
Been a very long time since I logged in. I have been slammed at my day job and let some sets of headers sit to long without sending them out. Josh and I discussed a few plans of attack and looks like I will be building up an inventory before I put a new site up. Josh and I have been discussing an actual VNT Kit including turbo, pipes, controller etc. and should have it for sale by mid summer. we ended up finding an amazing VNT option that should be an amazing setup. I might make a few changes to the header design ( Longer Collector etc.) but before I put the site back up I will have an inventory for same day shipping. Also on the new site I will be offering a ready built Deck Plated block and possibly a short block, but again inventory will be key. Also look for a major build to my wide body to come, engine is in machine right now but should be one of the strongest ones yet. Again If you want to get in touch just PM me because I will be on from here on out!
03-24-2014, 10:46 PM
#45
Three Wheelin'
Join Date: Aug 2007
Location: Upton, Massachusetts
Posts: 1,417
Likes: 0
Received 0 Likes
on
0 Posts
Hi guys
Been a very long time since I logged in. I have been slammed at my day job and let some sets of headers sit to long without sending them out. Josh and I discussed a few plans of attack and looks like I will be building up an inventory before I put a new site up. Josh and I have been discussing an actual VNT Kit including turbo, pipes, controller etc. and should have it for sale by mid summer. we ended up finding an amazing VNT option that should be an amazing setup. I might make a few changes to the header design ( Longer Collector etc.) but before I put the site back up I will have an inventory for same day shipping. Also on the new site I will be offering a ready built Deck Plated block and possibly a short block, but again inventory will be key. Also look for a major build to my wide body to come, engine is in machine right now but should be one of the strongest ones yet. Again If you want to get in touch just PM me because I will be on from here on out!
Been a very long time since I logged in. I have been slammed at my day job and let some sets of headers sit to long without sending them out. Josh and I discussed a few plans of attack and looks like I will be building up an inventory before I put a new site up. Josh and I have been discussing an actual VNT Kit including turbo, pipes, controller etc. and should have it for sale by mid summer. we ended up finding an amazing VNT option that should be an amazing setup. I might make a few changes to the header design ( Longer Collector etc.) but before I put the site back up I will have an inventory for same day shipping. Also on the new site I will be offering a ready built Deck Plated block and possibly a short block, but again inventory will be key. Also look for a major build to my wide body to come, engine is in machine right now but should be one of the strongest ones yet. Again If you want to get in touch just PM me because I will be on from here on out!
EDIT - And would love to dream about owning a VNT kit, if one is ever produced.