lart951

Where do you guys buy them new?

incomplete

porsche dealership. here's the PN: 443 971 850 A

enjoy!

alxdgr8

A few group buys have been done through mouser/digikey/etc. where there was a large minimum order. I think reno was the last one asking about them.

JohnKoaWood

Lart how many do you need?

I might know someone who has a few... but they dont list on Eaby, they deal solely through Email / private messages...

FWIW, the same tie wraps are used MANY more places on the car than just the firewall... like along the frame rails, under the bumper cover, under the car, in the rear hatch area just to name a few!

dillon410021

you can buy similar ones at menards

lart951

I dont know maybe a dozen maybe less how many do you need for the engine bay harness?

JohnKoaWood

I'm sure my friend has a car he can count the studs in, and I'm pretty sure he has your address....

If I were a betting man, I would say keep an eye on your mailbox!

lart951

Hoo'ra

azbanks

I've got a few left over from my rebuild. If you don't get enough from JKW's friend, let me know and I'll send some your way.

incomplete

same. i have about 6. let me know and i'll drop them in the mail for ya.

lart951

The nightmare begins

lart951

I dont know how many tie wraps for the engine bay harness but for the one that runs behind the dash there is only 2 tie wraps, engine bay maybe a dozen will do it my address is

Lart
6335 Corona ave
Bell, CA 90201

let me know how much I own you guys

Btw, this is my son's car I will be doing the euro-fog lights conversion on this car.

lart951

replace both harnesses, put the fuse box together, what a royal ultra ubber super pita, connected the battery and the car start it right up, now is time to put all together, now I am going to be honest with you guys but I didn't use no workshop manual, no notes no references it was all there.

gpr8er

don't mind me asking, but what are you doing? Is it coming apart or going back together?

lart951

is a car that I bought for my son and it had a hyfire 6 launch control and the connections to the coil were left exposed and it ground to earth causing a short circuit. Melted the black coil wire

here is the thread

https://rennlist.com/forums/944-turb...-the-coil.html

and here is the car
https://rennlist.com/forums/9391957-post53.html