What chip were U using when your head gasket blew??
11-05-2002, 05:57 PM
#1
Pro
Thread Starter
Join Date: Apr 2002
Location: N. Virginia
Posts: 549
Likes: 0
Received 0 Likes
on
0 Posts
What chip were U using when your head gasket blew??
There are many of you here that blew a head gasket or two...most of you running chips and higher boost....
Which chip were you using and at what boost when your head gasket blew? Is your 951 an S model?
I have not heard of anyone running stock chips and stock boost blowing a gasket. Has this happened to anyone?
I am considering upping boost to 15 psi with a set of chips but do not want any harm to my 951-S. I know its the A/F ratio that causes blown gaskets.
The front runners of course are Steve R and Guru Racing chips but not much reliability info on either, esp. applied to the S-models. Thoughts?
Thanks
Which chip were you using and at what boost when your head gasket blew? Is your 951 an S model?
I have not heard of anyone running stock chips and stock boost blowing a gasket. Has this happened to anyone?
I am considering upping boost to 15 psi with a set of chips but do not want any harm to my 951-S. I know its the A/F ratio that causes blown gaskets.
The front runners of course are Steve R and Guru Racing chips but not much reliability info on either, esp. applied to the S-models. Thoughts?
Thanks
