BLITZ SBC-ID boost controller installation
10-29-2002, 01:01 PM
#1
Instructor
Thread Starter
Join Date: Oct 2002
Location: Sweden/Stockholm
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
BLITZ SBC-ID boost controller installation
I just bought a new Blitz Boostcontroller from one of my Mitsu 3000 GT friends.
One of the functions on this controller is to read out several other values than just boostlevel. My question is if Itīs possible to plug It into the Ecu to read out fuel, watertemp etc. Does the ECU for 951 support this? My suggestion is that It wont. I wondering if itīs possible to read out that type of data from the 951 ECU?
The reason that I bought this controller wast to manage a Tial 46 mm wastegate and I want It to be real accurate. I also bought Greddy meters to the Boost and 4 E.G.T meters to control the exhaust temp.
Regards
Johan
One of the functions on this controller is to read out several other values than just boostlevel. My question is if Itīs possible to plug It into the Ecu to read out fuel, watertemp etc. Does the ECU for 951 support this? My suggestion is that It wont. I wondering if itīs possible to read out that type of data from the 951 ECU?
The reason that I bought this controller wast to manage a Tial 46 mm wastegate and I want It to be real accurate. I also bought Greddy meters to the Boost and 4 E.G.T meters to control the exhaust temp.
Regards
Johan
10-29-2002, 01:38 PM
#2
Rennlist Member
I don't now about the DME side of your question. Hhowever, did you buy 4 indiviual meters or just 1 meter and 4 probes?
You could easly hook 4 probes to a 4 way switch and read the cylinders individualy.
Alan
You could easly hook 4 probes to a 4 way switch and read the cylinders individualy.
Alan
10-29-2002, 01:44 PM
#3
Instructor
Thread Starter
Join Date: Oct 2002
Location: Sweden/Stockholm
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
I placed a order of 4 individual E.G.T meters.....now I can see the cash fly away 
I will call them tomorrow and see If there are any solutions to place 4 probes and read It out on one meter. The electronic E.G.T meter has the benefit that you can connect warning lights if the temp gets over a specified level etc.
I will call them tomorrow and see If there are any solutions to place 4 probes and read It out on one meter. The electronic E.G.T meter has the benefit that you can connect warning lights if the temp gets over a specified level etc.
10-29-2002, 03:34 PM
#4
Race Director
Pannan..have you already installed the Blitz controller? Id be interested to hear your thoughts on the Blitz after you get it installed and running.
Its the exact model I want and will prob buy before Christmas as Im getting ready to get a Tial in a week or two. Im sick of spikey boost!
Its the exact model I want and will prob buy before Christmas as Im getting ready to get a Tial in a week or two. Im sick of spikey boost!
10-29-2002, 04:19 PM
#5
Instructor
Thread Starter
Join Date: Oct 2002
Location: Sweden/Stockholm
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Hi Sam,
I can e-mail You when itīs installed. I think the installation would be done in December, Iīm waiting for Danno to decide what type of injectors I should use and I have to install the Guru MAP II kit before I install the Blitz. I have friends that have used it in their cars and they are really satisfied with the result. I first looked at the Apexi AVC-R but i choosed Blitz.
//Johan
I can e-mail You when itīs installed. I think the installation would be done in December, Iīm waiting for Danno to decide what type of injectors I should use and I have to install the Guru MAP II kit before I install the Blitz. I have friends that have used it in their cars and they are really satisfied with the result. I first looked at the Apexi AVC-R but i choosed Blitz.
//Johan
10-30-2002, 01:36 AM
#6
Race Director
Sounds great, Im in no real hurry as its now nearing winter and shes not a winter car 
I did buy a Tial 35/40mm hybrid Wastegate today so now the next step is finding a priced right Blitz SBC-iD.
Look forward to hearing your thoughts on it...
<img src="graemlins/beerchug.gif" border="0" alt="[cheers]" />
I did buy a Tial 35/40mm hybrid Wastegate today so now the next step is finding a priced right Blitz SBC-iD.
Look forward to hearing your thoughts on it...
<img src="graemlins/beerchug.gif" border="0" alt="[cheers]" />
