hacker-pschorr

I'm not familiar enough with 944 parts to tell, which spindles are those with the big brake adapter attached? Standard 944, turbo, or M030?

Awesome build, thanks for sharing.

Bob Rouleau

Ant and Ollie,

I have deleted a number of posts in this thread because advertising is reserved for site sponsors. This has been going on for some time. Why don't you two consider becoming a sponsor? You make nice stuff but your attempts to advertise her for free do not endear you to us. In addition, links to your website are not allowed unless you are a sponsor.

Regards,


Regards,

Olli Snellman

I don't have anything to do with Antti's business. He runs it by himself.I just use a lot of Antti's parts. If i am building a car for me or my son am i allowed to put pictures only of Rennlist small business etc. supporters ? Last time you warned of me on this you said it is OK to act like i do if i am a Rennlist member. I suppose i just have to stop writing here, because on terms you suggest to me and Antti, it's just impossible to continue. I am not able to be a small business suporter since i don't have any small or large business running in USA or either here which sells parts like Antti make. I don't get a dime of the parts Antti sells.

ant771

Thanks!

It's a billet hub.

ant771

Bob,

I have sent you an email two weeks ago and PM a one week ago. Could you please answer?

Antti

reno808

Dont stop posting.

Medski

Dont stop posting.

If what you are doing is wrong.. (posting about your car and your project) Then that means no one can post about a possible new part they found and can't let the rest of us know about it unless we sort of allready know because the manifacturer is a sponsor... The quality of this forum would suffer.

911-32

^^^ + 1000 ^^^

ant771

audisport

Is that last one a bell housing? For a twin disc clutch?

Olli Snellman

If you look closely to that engine block, you will find out it is a Audi 5 cyl block.....
Product is Antti's proto of Audi engine to 944 torquetube kit. Bell housing is newely cast.

ant771

Can you recognize them all?

reno808

intake, turbo, oil feed,turbo

333pg333

So the shock towers are run on a diagonal to be able to adjust camber and castor?

ant771

Basically yes, but you can also set the strut mount to zero degrees or 90 degrees. This way you can set full caster of full camber from the strut upper head.