FS: Official modded Turbo partout
07-20-2011, 04:28 PM
#19
Burning Brakes
Join Date: Mar 2006
Location: Orlando,FL (formerly UK)
Posts: 1,215
Likes: 0
Received 0 Likes
on
0 Posts
It was a little confusing: I was sure that I'd replied in this thread, but couldn't see my post... then I realized that I'd replied to the same thread in the 944/924/968 forum instead.
Now that I've got that figured out, here's my question: -Rear Axles?
I was thinking about getting a pair off eBay, but if you've got a known-good pair and will price-match, I'd be happy to give you the money instead...
Now that I've got that figured out, here's my question: -Rear Axles?
I was thinking about getting a pair off eBay, but if you've got a known-good pair and will price-match, I'd be happy to give you the money instead...
07-22-2011, 11:27 AM
#24
Intermediate
Join Date: Sep 2009
Location: Atlanta
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Are these Items Available?
Are these still available?
-Vitesse MAF and chipboard, 55lb Siemens injectors, 3.0 Bosh Fuel regulator, KN filter (30 more and I'll throw in intercooler pipes that has the straight pipe to replace one that goes around airbox)
- Turbo S wastegate
- Turbo DME/ KLR 250
- Exhaust Headers
Also Is the DME a Turbo S with Stock Chips?
-Vitesse MAF and chipboard, 55lb Siemens injectors, 3.0 Bosh Fuel regulator, KN filter (30 more and I'll throw in intercooler pipes that has the straight pipe to replace one that goes around airbox)
- Turbo S wastegate
- Turbo DME/ KLR 250
- Exhaust Headers
Also Is the DME a Turbo S with Stock Chips?
07-22-2011, 03:33 PM
#25
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Are these still available?
-Vitesse MAF and chipboard, 55lb Siemens injectors, 3.0 Bosh Fuel regulator, KN filter (30 more and I'll throw in intercooler pipes that has the straight pipe to replace one that goes around airbox)
- Turbo S wastegate
- Turbo DME/ KLR 250
- Exhaust Headers
Also Is the DME a Turbo S with Stock Chips?
-Vitesse MAF and chipboard, 55lb Siemens injectors, 3.0 Bosh Fuel regulator, KN filter (30 more and I'll throw in intercooler pipes that has the straight pipe to replace one that goes around airbox)
- Turbo S wastegate
- Turbo DME/ KLR 250
- Exhaust Headers
Also Is the DME a Turbo S with Stock Chips?
I dont be believe this is a turbo S. Are your looking for a Turbo S components?
07-22-2011, 03:37 PM
#26
Rennlist Member
Thread Starter
Join Date: Dec 2007
Location: Cameron Park/ San Diego, CA
Posts: 447
Likes: 0
Received 1 Like
on
1 Post
No the wastegate is shimmed an off of a Turbo S with 78.000, the rest of the car is an 86'. DME/KLR are pending at the moment. But I still do have the headers. Sold the MAF, but still do have injectors and 3.0 FPR, and intercooler pipes. If you are still interested send me a PM and we can work something out.
07-25-2011, 03:54 AM
#29
Rennlist Member
Thread Starter
Join Date: Dec 2007
Location: Cameron Park/ San Diego, CA
Posts: 447
Likes: 0
Received 1 Like
on
1 Post
Update on everything, shoot me an off on the shocks, I have a lot of interest on rears, any for the fronts?
Some good news I had so many stock parts left over I built a complete roller, and had my spare stock engine. So a fellow lister came by and mentioned his friend waslooking for a 951 project, so he bought the roller and stock engine, so the car lives on.
Some good news I had so many stock parts left over I built a complete roller, and had my spare stock engine. So a fellow lister came by and mentioned his friend waslooking for a 951 project, so he bought the roller and stock engine, so the car lives on.