Notices
944 Turbo and Turbo-S Forum 1982-1991
Sponsored by:
Sponsored by: Clore Automotive

Attn: John Anderson

Thread Tools
 
Search this Thread
 
Old 03-24-2003, 01:56 PM
  #1  
blurry951
Instructor
Thread Starter
 
blurry951's Avatar
 
Join Date: Nov 2001
Location: Santa Cruz, CA
Posts: 175
Likes: 0
Received 0 Likes on 0 Posts
Exclamation Attn: John Anderson

John, I really need my flywheel sensors back from you. I left them on the bell housing when I dropped off my motor and when I was picking it up it looked so good I forgot to check, but you did leave the mounting piece that holds the sensors in place under the intake manifold, just no sensors or the pieces that hold them in place with the piece that I have. I know your a busy guy, but I have a motor sitting and a couple of sensors sent to me will give me the green light. Please reply,...thanks John, Gabe
Old 03-24-2003, 02:29 PM
  #2  
Danno
Race Director
 
Danno's Avatar
 
Join Date: Jul 2001
Location: Santa Barbara, CA
Posts: 14,075
Likes: 0
Received 3 Likes on 3 Posts
Post

"Please reply,...thanks John,"

Yes, me too <img border="0" alt="[bigbye]" title="" src="graemlins/xyxwave.gif" /> ! I've only got less than 2 weeks until the <a href="http://www.opentrackchallenge.com" target="_blank">OTC</a>, I need my engine please. I've already missed 5 pre-registered track events to break in and tune the engine... this is getting expensive. <img border="0" title="" alt="[Frown]" src="frown.gif" />
Old 03-24-2003, 02:49 PM
  #3  
zakk
Instructor
 
zakk's Avatar
 
Join Date: Dec 2002
Location: Vienna, VA
Posts: 165
Likes: 0
Received 0 Likes on 0 Posts
Post

I'll throw my hat in the me too category. Need status on the catback, you have email from me John. (and a few other people, it seems like! )
Old 03-25-2003, 02:15 PM
  #4  
blurry951
Instructor
Thread Starter
 
blurry951's Avatar
 
Join Date: Nov 2001
Location: Santa Cruz, CA
Posts: 175
Likes: 0
Received 0 Likes on 0 Posts
Post

Bump.
Old 03-25-2003, 02:30 PM
  #5  
blurry951
Instructor
Thread Starter
 
blurry951's Avatar
 
Join Date: Nov 2001
Location: Santa Cruz, CA
Posts: 175
Likes: 0
Received 0 Likes on 0 Posts
Post

I have spoken to John and have resolved having sensors being sent to me,...Thanks John.
Old 03-25-2003, 03:39 PM
  #6  
Michael Weinstein
Instructor
 
Michael Weinstein's Avatar
 
Join Date: May 2001
Location: Tampa, FL - US of A
Posts: 245
Likes: 0
Received 0 Likes on 0 Posts
Arrow

I just spoke to John Anderson live and in person. He told me that he would refund my money by mailing me a check tomorrow. I will let the board know if and when I receive it.

I won't speak for John. He can tell whoever is interested what his problems are and were. He tells me that he won't post a response here, and I think that's a good idea. It wouldn't serve any purpose at this point.

I don't consider this over until the check is in my bank and cleared. I really don't think I should have had to go to this extreme to get action. I didn't want to, but exhausted all of my other options and my patience. And I have a LOT of patience.

I want to thank all of those people that lent me support, publically and privately. Its nice to know that some people out there understand the difference between right and wrong. The rest of you - good luck. That is all I can politely say. I just hope you aren't the next one to be screwed with. I hope that this will show some of the suppliers out there that we aren't going to take this crap any more. Always remember, that its YOUR money and you all have rights. I hope that this is now over once and for all.



Quick Reply: Attn: John Anderson



All times are GMT -3. The time now is 04:21 AM.