pic of tial wastegate install
04-08-2011, 11:59 AM
#1
Rennlist Member
Thread Starter
pic of tial wastegate install
Could anyone direct me (or have a pic themselves) to an underneath car pic of how a tial 46mm sits; and does there need to be anything fabbed up besides the the hardware that's supplied with the wastegate
04-08-2011, 01:29 PM
#2
Rennlist Member
I can dig up pictures tonight if no one else does in the meantime. You need to change the flange on the stock pipe, but otherwise it's straight forward.
04-09-2011, 02:59 AM
#4
Rennlist Member
Thread Starter
thanks Tom; that was the way I was planning on doing it as well
I also wanted to get a look at how it sits under the car because the tial has the exhaust flowing up against the face of the valve, which is opposite of the stock gate; so now the body is turned differently.
I thought there was a pic somewhere here on the forum, but I can't find it now.
I also wanted to get a look at how it sits under the car because the tial has the exhaust flowing up against the face of the valve, which is opposite of the stock gate; so now the body is turned differently.
I thought there was a pic somewhere here on the forum, but I can't find it now.
