Chip Question
#1
Rennlist Member
Thread Starter
Chip Question
Hey guys right now I am running a set of APE chips and they are to rich for my taste on idle, I was wondering how the Lindsey chips are during first start up on idle?
I know mine tend to have a decent amount of fuel, and it's pretty strong until it warms up. Thanks for the input.
I know mine tend to have a decent amount of fuel, and it's pretty strong until it warms up. Thanks for the input.
#5
Have 2 cars with Lindsey chips 2 very different setups from each other and both are very smooth , no weird stuff also both get great mileage. one is a instant RWHP kit with 48 # injectors. Other is MAF with mafterburner k26-8 cheater and all other normal mods.
Clifton
Clifton
#6
Rennlist Member
Thread Starter
honestly I don't know what my AFR's are, don't have a wideband yet... I have a narrow band that I can install if you think it would give me a general idea. Only thing done to the car is APE chips, MBC set 2 15psi, rebuilt wastegate (teamcrossworks).
Trending Topics
#8
Rennlist Member
I have a set of Russell Berry 951MAXIII chips for sale for $100 shipped. These are the same chips that Lindsey sells. The chips are for K26/6 turbo, AFM, stock injectors, 15-18psi and 3 Bar FPR.
PM me if interested.
Bill
PM me if interested.
Bill
#10
Hey Man
Rennlist Member
Rennlist Member
I ran a Weltmeister K26-6 chip (24 pin) in my K26-8 car for years. It required a shimmed WG but it held 14.5 psi to 6K and ran very well. I always passed smog testing here with it. I eventually changed to a Vitesse 26-8 chip for the added 1.5 psi. I sold the car but still have the Welt chip. $65/shipped if anyone wants it.
#14
As Rogue_Ant alluded to, new chips aren't really going to help your AFR at idle when you're running in closed loop mode with your O2 sensor. Save your money (maybe for a new O2 sensor) if that's your only concern.