Notices
944 Turbo and Turbo-S Forum 1982-1991
Sponsored by:
Sponsored by: Clore Automotive

Ignition switch ?

Thread Tools
 
Search this Thread
 
Old 11-15-2010 | 08:45 PM
  #1  
Fluidplay's Avatar
Fluidplay
Thread Starter
Three Wheelin'
 
Joined: Feb 2007
Posts: 1,441
Likes: 1
From: Orange County, CA
Default Ignition switch ?

Can someone confirm that the red/blk wire in this photo is the crank/starter position wire. I believe it is, but would like to be sure...

Thanks guys!

Old 11-17-2010 | 10:38 AM
  #2  
mikeyoman's Avatar
mikeyoman
Rennlist Member
 
Joined: Nov 2002
Posts: 311
Likes: 10
From: back in the UK
Default

yes that's the one, 4mm cross section wire, also feeds to the DME pin 4 to bring on the fuel pump, via the DME relay.
Old 11-17-2010 | 04:07 PM
  #3  
Fluidplay's Avatar
Fluidplay
Thread Starter
Three Wheelin'
 
Joined: Feb 2007
Posts: 1,441
Likes: 1
From: Orange County, CA
Default

Thanks, I ended up putting a tester on it for continuity. Appreciate ya chimming in...



Quick Reply: Ignition switch ?



All times are GMT -3. The time now is 07:17 PM.