Garage Sell, AOR, Vitesse Cam, Fuel Pumps MISC
09-06-2010, 07:02 PM
#1
Rennlist Member
Thread Starter
Join Date: May 2005
Location: Mayflower, AR
Posts: 1,075
Likes: 0
Received 0 Likes
on
0 Posts
Garage Sell, AOR, Vitesse Cam, Fuel Pumps MISC
I have to move some of my stuff, need the cash much worse than I need the parts. Look through the list and see If I have anything I can help you with. If you don't see it on the list, let me know what it is you need and your offer and I'll get back with you ASAP. Please email me for faster response, Turpinjl@hotmail.com is my email and paypal.
Burgundy Script front and rear seats in Great condition $600 OBO
Black non Airbag dash in perfect condtion with factory leather lower section and glove box $800
Complete Used head with Good valves $250
951 Rods $50 each
951 Group 2 pistons used with vavle contact $250
KW Variant 3 Suspension $2,400
Vitesse Racing Street Cam $500
87 up Non M030 front and rear brake assemblies $500
Late Rebuild Control Arms with less than 10K miles $300 Set
M030 951 Control Arms, good ball joints 300 Set
Various exhaust,wastegate,mufflers Varies
Sunnen AN-111/112 with case and all correct stones for 944/928 blocks with felt, oil and paste $600
Milwaukee gear reduction 1/2 drive drill low RPM for AN $200
Set of 944S2 sport Sways 27.6 MM front $200
86 Front Sway $50
New Hamburg Teknic Engine Mounts $80 Pair
Good used Factory Engine Mounts $100 Pair
Set of Hela H4 Headlights with bulbs $100 shipped
With new Rennbay relay harness and high output bulbs add $120
Linen leather front seats in good condition $450 Pair
Burgundy Rear Split seat backs with bottom, very nice $250
AOR LSD Transaxle $2,500 OBO
951 Crank $150 OBO
Nice SunVisors $25 Each
Nice Climate control Module A/C and Heat $150 shipped
Misc Buttons,sensors, brackets, holders and hardware Varies
ABS Module $100
Cruise Control Module $100
Air bag module $100
Cross over pipe $150 obo
Waste gate pipe $50 obo
Down Pipe $50 obo
Cooling Fan $50 Each
Good used Fuel Pump $50 Shipped
Good Used Starter $75 shipped
Mirrors, rear view and outside
Porsche Door handles script set with key $200
Airbag and Non Airbag Steering wheels Varies
Many others, just ask and make fair offer
Burgundy Script front and rear seats in Great condition $600 OBO
Black non Airbag dash in perfect condtion with factory leather lower section and glove box $800
Complete Used head with Good valves $250
951 Rods $50 each
951 Group 2 pistons used with vavle contact $250
KW Variant 3 Suspension $2,400
Vitesse Racing Street Cam $500
87 up Non M030 front and rear brake assemblies $500
Late Rebuild Control Arms with less than 10K miles $300 Set
M030 951 Control Arms, good ball joints 300 Set
Various exhaust,wastegate,mufflers Varies
Sunnen AN-111/112 with case and all correct stones for 944/928 blocks with felt, oil and paste $600
Milwaukee gear reduction 1/2 drive drill low RPM for AN $200
Set of 944S2 sport Sways 27.6 MM front $200
86 Front Sway $50
New Hamburg Teknic Engine Mounts $80 Pair
Good used Factory Engine Mounts $100 Pair
Set of Hela H4 Headlights with bulbs $100 shipped
With new Rennbay relay harness and high output bulbs add $120
Linen leather front seats in good condition $450 Pair
Burgundy Rear Split seat backs with bottom, very nice $250
AOR LSD Transaxle $2,500 OBO
951 Crank $150 OBO
Nice SunVisors $25 Each
Nice Climate control Module A/C and Heat $150 shipped
Misc Buttons,sensors, brackets, holders and hardware Varies
ABS Module $100
Cruise Control Module $100
Air bag module $100
Cross over pipe $150 obo
Waste gate pipe $50 obo
Down Pipe $50 obo
Cooling Fan $50 Each
Good used Fuel Pump $50 Shipped
Good Used Starter $75 shipped
Mirrors, rear view and outside
Porsche Door handles script set with key $200
Airbag and Non Airbag Steering wheels Varies
Many others, just ask and make fair offer
Last edited by jlturpin; 09-11-2010 at 11:14 PM.
09-06-2010, 07:16 PM
#3
Rennlist Member
Thread Starter
Join Date: May 2005
Location: Mayflower, AR
Posts: 1,075
Likes: 0
Received 0 Likes
on
0 Posts
If you can get John to tell you, let me know. I bought it from him and have asked several times and he has either ignored the question or said he was unable to give me the specs.
He said it was supposed to not increase spool time while improving mid and upper range of the revs. It does do that.
Also, I am not asking for a return core, which is required if you buy it from John.
He said it was supposed to not increase spool time while improving mid and upper range of the revs. It does do that.
Also, I am not asking for a return core, which is required if you buy it from John.
09-06-2010, 10:36 PM
#7
Racer
Join Date: Jul 2010
Location: Bedford PA
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
well, I guess that's sort of the answer i was looking for about the cam. I guess the rest is "secret squirrel stuff"
I won't bother John about this, just wondered where the improvement was mainly.
I won't bother John about this, just wondered where the improvement was mainly.
