CyCloNe!

Hey guys I tested my reference sensors and I think one is bad, just looking for confirmation... I used a multimeter and checked the resistance on the plugs directly to the sensor.

Sensor1: 1400ohm (roughly) and 0k ohms (exactly)
Sensor2: 1400ohm (roughly) and 77k ohms (exactly)

it says on clarks said that they need to be 600-1600ohm and >1M ohm

CyCloNe!

never mind false alarm.. i tested them wrong accidently got my finger in the way, they checked out good..... 1200 ohm and 0 ohm

Ronin-951

Wave a magnet under them and see if you get a reaction on the meter, just to be sure.