racerxrick

Just found them on my initial inspection (on the rack!)

racerxrick

hmmm...worth a try, sounds too easy

racerxrick

Thanks Jason...I'll plan to call you direct soon. Back froma short vacation and covered up here.

I'm anxious to get this done as it's the last bit of "maintenance" that I need right now!

theedge

Do you have the little spacers that go on the rod ends on the REAR stage 2 bar? Weltmeister calls them buttons or rod end liners, but rears are a different size from the front. One is 3/8 one is 5/8 I think, I can check when I get home. I need the ones for the rear only.

Edit: http://thedge.info/rennlist/weltmeisterbars/weltbar.pdf the last page shows them as part "S" on the front, but that is different from the rear. I need that same part for the rear.

racerxrick

I need "L" and "K"...rear swaybar though like theedge.

racerxrick

I called Jason at Paragon products and he has the parts in stock. Jason knows the 951 and was very helpful and fun to talk with. Heck I want to go drive my car now!

Part numbers are:

ZC-SB-5000J (metal sleeve) requires two (2)

ZC-SB-5000K (rubber bushing) requires four (4)

Thanks to all who responded to my post and thanks to Jason

Jason @ Paragon Products

I'm bringing back an old thread to give you a heads up on the Weltmeister brand. The Automotion, Performance Products & Weltmeister names and products were recently sold to a UK based company. Although we've carried the Weltmeister brand since day 1 of Paragon Products that looks to be coming to an end. We may tool up to make some of these items but as of now, what we have is what we have. Our online listing should now be up to date regarding inventory but we may update after going through our 25 years in the making "stash of parts". If you need something or want to have spares now may be the time to act.

https://www.paragon-products.com/Wel...%20sb-5400.htm

https://www.paragon-products.com/Wel...%20sb-6100.htm