Paseb

too low in the front, not enough in the back, but its installed!!!
next step, install fmic and oil cooler in the front bumper...
and finish install of 968 wing

Van

Re-index torsion bars.

2bridges

doesn't look to low in the front to me, just high in the back

Paseb

torsion bars are removed,
koni coilovers on all 4

2bridges, you dont live in montreal, you would understand that its way too low lol

fbgh2o

I would look for more clearance in the front... It's Montreal and you need it. I don't know how many rims my family has bent, but with really low clearance I would be really worried about the front ride height... I found even my stock ride height had me dodging pavement obstacles in Montreal

mwc951

Paseb...

Are you using an OEM 968 wing or CPR or??

DanR

glad you are nearly there!

odb812

wow, that car has changed a lot in a year.

jasonlp

Mines pretty low Seb, you can take it there to. I have no clearance issues with speed bumps

Here is the best picture I could find

Paseb

its not an oem wing,
not cpr also,

i bought it new from a guy in Europe, ebay,

i will post pics friday when i finished the install

Paseb

thanks, over 1 year its in the garage lol

Paseb

like the show on tv, extreme make over

Paseb

nice pic jason, yes its kind of low

jason, are you still pretty busy with you car nowadays?

MM951

Big reds sure do look pretty under 17s

jmj951

If you need another way to lower the rear a bit more, contact Ground Control suspension systems (http://www.ground-control-store.com/). They have a custom rear eccentric bolt that will allow you to drop it down a bit more.