Lindsey parts FS
01-06-2010, 10:57 PM
#1
Burning Brakes
Thread Starter
Lindsey parts FS
Complete 3" exhaust from turbo-back with the integrated wastegate dump into the exhaust, and muffler. Low miles SOLD
Stage II MAF kit with the Perfect Power controller and silicone couplers, low miles SOLD
Also have a scored block (piston #1) that is a perfect candidate for a sleeved project - $100
And if the price is right, I have a nearly complete engine in parts with ceramic coated 951 pistons, freshly honed block, the custom Lindsey rings (already gapped and fitted), head with a 3 angle grind, and almost everything needed to assemble except for balance shaft bearings and gaskets for the short block. I'm ok with not selling it, fyi
I can get pics this week if needed.
Stage II MAF kit with the Perfect Power controller and silicone couplers, low miles SOLD
Also have a scored block (piston #1) that is a perfect candidate for a sleeved project - $100
And if the price is right, I have a nearly complete engine in parts with ceramic coated 951 pistons, freshly honed block, the custom Lindsey rings (already gapped and fitted), head with a 3 angle grind, and almost everything needed to assemble except for balance shaft bearings and gaskets for the short block. I'm ok with not selling it, fyi
I can get pics this week if needed.
Last edited by Barry Johnson; 01-13-2010 at 07:51 PM.
01-06-2010, 11:40 PM
#3
Burning Brakes
Thread Starter
The coupler is made for the stock size inlet, but if you're running a larger turbo, get a different piece of silicone and thats it.
The stage II was an upgrade they offered, but I can't remember what was different about it... Maybe someone else can chime in on that one?
The stage II was an upgrade they offered, but I can't remember what was different about it... Maybe someone else can chime in on that one?
Trending Topics
01-13-2010, 07:52 PM
#10
Burning Brakes
Thread Starter
Parts are sold, scored block still available for a sleeved motor. I have a local place that does the work at a great price too and can arrange the work and shipping after completion as well.
01-13-2010, 10:58 PM
#12
And if the price is right, I have a nearly complete engine in parts with ceramic coated 951 pistons, freshly honed block, the custom Lindsey rings (already gapped and fitted), head with a 3 angle grind, and almost everything needed to assemble except for balance shaft bearings and gaskets for the short block. I'm ok with not selling it, fyi
I can get pics this week if needed.
I can get pics this week if needed.
01-14-2010, 06:14 AM
#13
Burning Brakes
Thread Starter
Ha! This one was a real find, stored for 7 years in private collections, never riden till I bought it in July. Race tune and race exhaust, pretty amazing machine. You can buy my stock header if you want! 
Hot_J, I PM'd you about the engine.
Hot_J, I PM'd you about the engine.