blazak precision , ummm, it arrived!
#16
Nordschleife Master
#17
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
#20
Nordschleife Master
#25
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
As many said he may be very busy now. I would try calling first, and email second.
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
Blaszak Precision Motorsports
Markus@BlaszakPrecision.com
www.BlaszakPrecision.com
![Wink](https://rennlist.com/forums/images/smilies/wink.gif)
Blaszak Precision Motorsports
Markus@BlaszakPrecision.com
www.BlaszakPrecision.com
#27
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
My clutchfork arrived today, it's been eight weeks since I shipped it to Markus. The above emails probably don't work. His current email is mblaszak@kos.net. Good luck. Hope you have something else fun to drive in the interim!
And I wouldn't bother calling. Lately there's actually a recording, but you cannot leave a message.
And I wouldn't bother calling. Lately there's actually a recording, but you cannot leave a message.
Last edited by georgeleroy; 09-03-2009 at 10:58 PM. Reason: updated information
#30
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Replaced the needle bearings with Poly Bronze Bushings self lubricating last a lot longer than needle bearings.
Had the fork shot peened...Any decent machine shop has the capability of doing the same
Cost was $50 bucks included the bronze bushings..
If you want more picture let me know..
-BB
Had the fork shot peened...Any decent machine shop has the capability of doing the same
Cost was $50 bucks included the bronze bushings..
If you want more picture let me know..
-BB