future

Hi Gents

We are looking for wheels for our new wide body race car and a customer of ours has reccommended Complete Custom Wheels: http://www.ccwheel.com/

Anybody have experience with these guy's and can provide some feedback I'd seriously apreciate it. The ones we are looking at at the 18x12 LM20's.

Pictured below are there "Classic" wheels fitted to Tory Herring's stunning race car taken at Sebring (Tory is a 61 year old so a big thumbs up and respect to him ):






(Above)Tim AKA Lemming’s car in the background … Tim if you want the high ress picture then drop me a PM and I’ll email it over to you

Originally we were set on opting for the ATS GT-Racing Central Locking wheels which are very light, strong and reasonably priced in 18x11 front and 18x13 rear:



The above ATS wheels are still our preferred choice and we will be running the top of the line AP-Racing discs and calipers rather than bigger Brembo units.

Any info that can be supplied on single wheel bolt hubs will be MUCH appreciated also.

Sorry for the lack of updates on our side however we are crazy busy with various project cars. Beni is currently in Germany fitting a new steel roof to our 968 TRS Rep. which we will detail with a full picture thread over this weekend. From my understanding the new roof skin is now fitted and Beni was re-painting the car today but I don't have pics yet.

The dedicated race car we are building ... Here is a quick couple of pics:






(Beni above enjoying some scraping)

The front fenders and bumper we purchased of Hans including the carbon splitter but we will be making drastic aero changes to the entire front end.

Lastly a few pictures of Beni's road car undergoing a new paint job at our new factory with our 968 in the background:




(Above before work started)



Best regards,
Mark

fast951

I have the CCW wheels on my race car, I also know many racers that have them. I recommend them!
The owner of CCW, John, can assist you with offset etc..

dillon410021

I really like the one in the last 2 pics. It looks awesome

future

Thanks John, I'm also getting PM's stating the very same ... How everything going at your end mate as I trust all is well I'll have to touch base with you again very soon

Thanks Dillon I'll post some more pics of Beni's car for you shortly. It's the very one which used to have the white stripes running over it but now it will get the full D9 treatment after the paintwork's complete which will be in a couple of weeks.

The wide body project is my old DD and development car. I've not used it for over 3 years so gave it to Beni rather than part it out as it needed alot of money spent on it to bring it back from the dead - Now it getting a whole new lease of life which it much deserves but at HUGE cost

future

Dillon, pics of Beni's car from a few years ago and for those that remember it:







And a few more pics of it's current state:











The 17 inch twists currently on the car will be replaced with either 18 inch hollow spoke twists which Beni already has powder coated again white ready for tyres or a set of 993 GT2 Speedlines we have laying about gathering dust which are in as new condition again needing tyres

Best regards,
Mark

Keithr726

CCW makes great wheels, I was looking into them but took a cheaper route.

DanR

I have CCW classics on my race car (sorry ex race car) They are very strong and reasonably light. I just bent a wheel at WGI and will just buy a new half and then they are good ot go again. The are very helpful and knowledgable as well

future

Thanks guy's for the heads up

Dave, I've responded to your PM and sent you an email mate so I'm hoping this can lead us down the center locking path

Best regards,
Mark

bigdeano

Sorry for OT but when did your race car become an ex race car? And why?

ritzblitz

My dad has C14s and they are sick nasty. Great wheels, John at CCW is a nice guy too.

future

Sounds like John is a real stand up guy

Lets have some pics of his wheels fitted to cars

MPD47

I used to have classics, definitely give John a call.

bigdeano

They sure do look purdy! I thought my FM10s are hard to clean, but those classics look like they might actually be somewhat more difficult.

fast951

Everything is going great here, hope the same with you. Let's touch base soon, I'm getting very close to needing the hood loovers we talked about a while back

future

No probs John, you know we'll sort out a good deal for you - look forwards to having a chat very soon mate