MM951

I need this YESTERDAY. Can anyone ship me this elbow/triangle flange ASAP??? I need to get my car back together NOW and also need it to be ready for 944 Fest and this is all I need.

Please send offers shipped to 12571



It is the elbow that is compatible with this cross over

cruise98

You have the late crossover pipe in that picture. It was used on the Turbo "S" and maybe others.

I do not have the parts, but here are the numbers...

pipe 951.123.027.01
flange 951.123.260.01
gasket 930.123.134.04
seal ring 993.111.195.00

plus nuts, bolts and washers. have you checked stock with Park Place, Hennessey or Sunset?

MM951

Thanks for the part numbers, everyone I've called for it needs to get it special-ordered (at least 1 week before I get it in my hands) on top of being obscenely expensive.

xupkid2

I have one but it is in 2 pieces and needs to be welded. The flange on it cracked all the way around. It is a clean crack and could be easily welded back together. Not sure if that helps.

ausgeflippt951

I may have what you're looking for. Let me check -- it is, however, from an '86, so I'm not sure if this is what you need.

Techno Duck

There is one up on eBay though not sure if its the exact same one. Also may want to ask Adrian, he just started parting a 951 out and is semi-local to you.

Van

Have you called George Beuselinck?

CarbonRevo

I can send the elbow from my car that was used with my crossover and all the gaskets too. I'll do it asap is you just reimburse for the shipping. I can have it out tomorrow morning and have it there Thursday morning by noon. Shipping should be 20-25 bucks.

I'll get a picture up tonight to double check it is what you need.

MM951

If I'm reading this right, you are taking it off your car.....please don't do that, only if its a spare If its not a spare, don't worry about it!

CarbonRevo

Mike...You have a PM. Please check it and respond asap. Thanks.

CarbonRevo

I sent the 3 pieces on the left hand side of the picture. Hopefully you have the piece on the right side?

And a picture of the box. It's tiny lol

CarbonRevo

Dropped the package off 5 minutes ago.

MM951

You are the man. I'll throw in a little bonus

azmi951

That is what happens when you delete the stock wastegate bracket that clamps around the torque tube and bolts to the wastegate dump. The Tial is lighter but it is still a lot of weight to support by somewhat brittle exhaust.

VOoDOoGTX

did you draw dicks all over the box?