CPR

Who else sells Welt 250 (or comparable) springs as a direct replacement for the factory springs on th Koni yellows (front struts)? Vendors or private sellers are fine.

I have contacted Paragon, Pelican and a few local suppliers with no luck. Everyone seems to be "sold out".

Any leads would be a big help. I need them ASAP.

Techno Duck

Lindsey Racing has them also.

APKhaos

FWIW, if you know the length, diameter, and rate you want then call your local Hypercoil dealer. They are terrific springs at a very good price. Local race shop did some interesting comparos between a box of new "german" springs and several sets of Hypercoils. The Hypercoils were within 2% of their specified spring rate. The german springs were a very wide spread on measured vs specified.

gt37vgt

you can also use 2.5" Dia springs on standard struts perches and just get top perches or even weld a ring in the top perch you have

Mike Lindsey

We stock them.

95ONE

There used to be tons of used ones on here for $50 each set. I just don't see them anymore.

CPR

I'm counting on it!

I had Eric order them today with a few other odds/ends. Thanks.

PATRICK