FS: Motons, Vitesse, Injectors, wheels and other good stuff
#1
Rennlist Member
Thread Starter
Join Date: May 2005
Location: Mayflower, AR
Posts: 1,075
Likes: 0
Received 0 Likes
on
0 Posts
![Thumbs up](https://rennlist.com/forums/images/icons/icon14.gif)
Well, too many projects and many other "wants" are the motivation behind the items that are being listed for sale. I am going to return my 89 to stock since it will probably never end up on a track.
All prices that are listed are OBO, plus shipping and 3% paypal fee.
No checks.
I will not disclose any negotiation for parts on this forum. Feel free to make offers in the thread, but our Final agreed upon price will not be disclosed in the thread.
More than likely when 1 one of my MAF's sells, I'll keep the other. FYI
* Vitesse Stage II Turbo, NO Shaft play and recent rebuild.
$2000 OBO + Shipping
* Vitesse MAF Kit with 55# injectors (recently flow matched), Chip board (89 951S) 28 Pin Chip board, and Adjustable FPR $1600 OBO + Shipping
* Vitesse MAF Kit with 75# injectors, 3bar FPR. Kit has less than 2k Miles on it.
Vitesse Chip board 28 pin, installed in 86 951.
$1700 OBO + Shipping
* Vitesse MAF Stealth Adapter (not a MAF setup, just the adapter for the airbox) -like new (this is Vitesse's adapter to use you J-boot and keep the stock airbox. This allows you to simply replace the AFM with a MAF in the same location, keeping a stock look.
$100 OBO + Shipping
* 18" Turbo twist II wheels and tires, less than 2k miles, NO Curb Rash or Damage. Fit great on Early offset. Seems like they are 45 Rear and 40 front offset. I run a 7MM Spacer on rear.
$1600 OBO + Shipping
![](http://www.autocrossphoto.com/89turbos/images/dsc_0048.jpg)
* A- Pillar Gauge Pod
$100 OBO + Shipping Used
* Front fiberglass vented header panel (High Gloss Black)
$275 OBO + Shipping Used in Great condition
![](http://www.autocrossphoto.com/89turbos/images/dsc_0046.jpg)
* Splitter, Fiberglass (Flat Black)
$250 OBO + Shipping Used, and could use touch up
![](http://www.autocrossphoto.com/cliff951s/images/009_9.jpg)
As items are sold, I will remove items from list. Thread will be updated with pictures. Or sent as requested via Email.
All prices that are listed are OBO, plus shipping and 3% paypal fee.
No checks.
I will not disclose any negotiation for parts on this forum. Feel free to make offers in the thread, but our Final agreed upon price will not be disclosed in the thread.
More than likely when 1 one of my MAF's sells, I'll keep the other. FYI
* Vitesse Stage II Turbo, NO Shaft play and recent rebuild.
$2000 OBO + Shipping
* Vitesse MAF Kit with 55# injectors (recently flow matched), Chip board (89 951S) 28 Pin Chip board, and Adjustable FPR $1600 OBO + Shipping
* Vitesse MAF Kit with 75# injectors, 3bar FPR. Kit has less than 2k Miles on it.
Vitesse Chip board 28 pin, installed in 86 951.
$1700 OBO + Shipping
* Vitesse MAF Stealth Adapter (not a MAF setup, just the adapter for the airbox) -like new (this is Vitesse's adapter to use you J-boot and keep the stock airbox. This allows you to simply replace the AFM with a MAF in the same location, keeping a stock look.
$100 OBO + Shipping
* 18" Turbo twist II wheels and tires, less than 2k miles, NO Curb Rash or Damage. Fit great on Early offset. Seems like they are 45 Rear and 40 front offset. I run a 7MM Spacer on rear.
$1600 OBO + Shipping
![](http://www.autocrossphoto.com/89turbos/images/dsc_0048.jpg)
* A- Pillar Gauge Pod
$100 OBO + Shipping Used
* Front fiberglass vented header panel (High Gloss Black)
$275 OBO + Shipping Used in Great condition
![](http://www.autocrossphoto.com/89turbos/images/dsc_0046.jpg)
* Splitter, Fiberglass (Flat Black)
$250 OBO + Shipping Used, and could use touch up
![](http://www.autocrossphoto.com/cliff951s/images/009_9.jpg)
As items are sold, I will remove items from list. Thread will be updated with pictures. Or sent as requested via Email.
Last edited by jlturpin; 03-02-2008 at 10:33 PM. Reason: Added photos
#4
Rennlist Member
Thread Starter
Join Date: May 2005
Location: Mayflower, AR
Posts: 1,075
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
PM's replied
I have updated the first post about the Stealth MAF adaptor. It is just the Factory Airbox adaptor that Vitesse sold for awhile, to allow you to run the MAF, with you J-boot and Factory airbox in place. The MAF simply replaces the AFM at this point for a factory look.
I have updated the first post about the Stealth MAF adaptor. It is just the Factory Airbox adaptor that Vitesse sold for awhile, to allow you to run the MAF, with you J-boot and Factory airbox in place. The MAF simply replaces the AFM at this point for a factory look.
#5
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Which vented nose/header panel is it please?
Trending Topics
#10
Rennlist Member
Thread Starter
Join Date: May 2005
Location: Mayflower, AR
Posts: 1,075
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I have someone waiting to purchase them if you are interested in the Moton's. There have been several PM's concerning the RE camber plates, but I won't sell them unless the Moton's are gone. Let me know.
#11
Addict
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Can you post or PM or email me some pictures of the Motons please. What is the price on them without the RE camberplates? I don't really need the springs either. thanks!
#13
Rennlist Member
Thread Starter
Join Date: May 2005
Location: Mayflower, AR
Posts: 1,075
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Sorry for the delay, been really busy with other stuff. Here are some photos of the Moton's. You can see the front M030 sway bar, springs and hats.
http://www.autocrossphoto.com/Moton/index.html
And of the Camber plates. You can also see the Strut bar braces in these photos.
http://www.autocrossphoto.com/camberplates/index.html
http://www.autocrossphoto.com/Moton/index.html
And of the Camber plates. You can also see the Strut bar braces in these photos.
http://www.autocrossphoto.com/camberplates/index.html
#15
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Jonathon,
Please email me or phone me, I am interested in the Motons, camber plates, and strut bar.
225 573-0664, maxenergy@***.net
Max
Please email me or phone me, I am interested in the Motons, camber plates, and strut bar.
225 573-0664, maxenergy@***.net
Max