Turned the key on the 5.7 today...
#33
Rennlist Member
#35
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
wampir haha nice good job parking on the sidewalk. hehe i know everybody parks on the sidewalk.
2bridges is that a CHEBY ENIGINE
2bridges is that a CHEBY ENIGINE
![nono](https://rennlist.com/forums/graemlins/nono.gif)
#37
Rennlist Member
#38
Instructor
Join Date: Sep 2007
Location: Warsaw/Poland
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
#39
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Being reworked at the moment - hairy roller cam, world heads (2.10,1.6 valves), roller rockers, 5.7 rods, hyper 11:1 pistons, internal balanceded bottom end, elbrock performer air gap intake, 750 carb, etc, etc, etc
Backed with a 400TH and 3:73 posi in a sub 3000lb 49 ford coupe.
BRING IT ON
![bigbye](https://rennlist.com/forums/graemlins/xyxwave.gif)
#40
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
LOL - fraid not little buckaroo.... unless your itty bitty 289 is spinnin 10,000rpm got nuthin on this one.
Being reworked at the moment - hairy roller cam, world heads (2.10,1.6 valves), roller rockers, 5.7 rods, hyper 11:1 pistons, internal balanceded bottom end, elbrock performer air gap intake, 750 carb, etc, etc, etc
Backed with a 400TH and 3:73 posi in a sub 3000lb 49 ford coupe.
BRING IT ON![bigbye](https://rennlist.com/forums/graemlins/xyxwave.gif)
Being reworked at the moment - hairy roller cam, world heads (2.10,1.6 valves), roller rockers, 5.7 rods, hyper 11:1 pistons, internal balanceded bottom end, elbrock performer air gap intake, 750 carb, etc, etc, etc
Backed with a 400TH and 3:73 posi in a sub 3000lb 49 ford coupe.
BRING IT ON
![bigbye](https://rennlist.com/forums/graemlins/xyxwave.gif)
WTF are you doing putting that pos engine one of the best chassis 49 ford coupe. hehe just kidding but your killing me.
btw that motor is coming out due too the ped lifting because the cams had to much lift hehe. So i am going to put my dad corba spec motor (289)in my 67 fastback hehe.
Please post some pics of the 49
btw what kind of carb spacer is that? Go with a wooden spacer ITS the BEST but you didnt hear it from me hehe.
Last edited by reno808; 01-04-2008 at 12:40 PM.
#42
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
nah - older style automatic 400TH short shaft trans, no electronic BS - will be running 2800 stall as well.
don't have many pics at all of the 49. here is one that will give the idea.... is in front of the 33 ford pickup
don't have many pics at all of the 49. here is one that will give the idea.... is in front of the 33 ford pickup
#43
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Nice very nice. I love that pick up with the flat head. I would like to get one those later on. keep me posted on you advancement. Meanwhile i'll take some picks of my 67
#44
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Start the 6.0 liter turbo diesel daily. Below 40 degrees, it'll blow a little smoke but runs like a champ otherwise.
I start my Porsche every two weeks or so to keep it in good shape and make sure things stay in good working order and I even drive it around the block without using the broken second gear. Makes a ton of racket doing it.
The girlfriend never has a hard time starting up and runs continuously. When they stop running or don't run very well, it's time for a trade in boys.
I start my Porsche every two weeks or so to keep it in good shape and make sure things stay in good working order and I even drive it around the block without using the broken second gear. Makes a ton of racket doing it.
The girlfriend never has a hard time starting up and runs continuously. When they stop running or don't run very well, it's time for a trade in boys.
#45
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I'd be prepared to do you a good deal on your current g/f Joe. What are friends for..heheheh