Clewett Engineering
11-20-2007, 09:45 PM
#1
Pro
Thread Starter
Join Date: Apr 2005
Location: Puerto Rico
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
Clewett Engineering
Just want to give a big thumbs up to Clewett Engineering products!
Took me a while to write it, but anyways, I was on the process of fighting with my Megasquirt conversion on my 951 due to the stock triggers. I ended up buying an oscilloscope and finding too much noise on some parts of the circuit to try and make it as bolt on as possible with the stcok VRs. So in my quest for reliability, I finally bit the bullet and ended up giving up my VISA card to Clewett.
BEST DAM DECISION!
I bought the 60-2 trigger wheel kit and it is sincerely VERY nice. I have knee mills at the shop and was planning on making one, bought I thought somebody had allready spent the time and trouble of doing it.
And regarding the signals...very clean and smooth without any vibration or noise issues.
Took me a while to write it, but anyways, I was on the process of fighting with my Megasquirt conversion on my 951 due to the stock triggers. I ended up buying an oscilloscope and finding too much noise on some parts of the circuit to try and make it as bolt on as possible with the stcok VRs. So in my quest for reliability, I finally bit the bullet and ended up giving up my VISA card to Clewett.
BEST DAM DECISION!
I bought the 60-2 trigger wheel kit and it is sincerely VERY nice. I have knee mills at the shop and was planning on making one, bought I thought somebody had allready spent the time and trouble of doing it.
And regarding the signals...very clean and smooth without any vibration or noise issues.
11-20-2007, 10:19 PM
#3
Pro
Thread Starter
Join Date: Apr 2005
Location: Puerto Rico
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
12-03-2007, 02:09 PM
#6
Racer
Join Date: May 2007
Posts: 491
Likes: 0
Received 0 Likes
on
0 Posts
I have that kit too but with a custom machined 36-1 wheel. Works FLAWLESSLY! It is the one "overpriced" part on my car that I can honestly say was worth the money. Also, I used their logo to make a fake C.A.R.B. exemption sticker that saved me a lot of time when I had to pass smog 
