Post pics of your 951 with fr splitter please
#31
It's my friends EX '91 951 (if you mean that black car) I have to dig some more picturs of it.
There's also clone 968 mirrors installed. My car will look similar, except i have also 968 door handles. here's several mirrors:
My set up with old wheels:
My friends EX '91 951
Some of our "gangs" cars
There's also clone 968 mirrors installed. My car will look similar, except i have also 968 door handles. here's several mirrors:
My set up with old wheels:
My friends EX '91 951
Some of our "gangs" cars
#33
Burning Brakes
Thread Starter
Although I dont like aftermarket spoilers in general, I do believe that this splitter looks nice.
Any pics with nose panels too ??? Does it give any air flow benefit ?
Any pics with nose panels too ??? Does it give any air flow benefit ?
#38
The nose panels are purely cosmetic (and I used to have one). The stock vent is at the point of highest pressure and adding a vented nose panel lowers the pressure and reduces airflow through the intercooler.
The best possible results are to use the GT splitter without a vented nose panel. The GT splitter traps more of the air and has an increase in pressure over the AIR splitter.
However, the AIR unit has an oem look to it and complemets the car more than the race look of hte GT.
The best possible results are to use the GT splitter without a vented nose panel. The GT splitter traps more of the air and has an increase in pressure over the AIR splitter.
However, the AIR unit has an oem look to it and complemets the car more than the race look of hte GT.
#40
Actually Strosek is the original manufacturer of this "AIR" splitter. AIR just cloned it, like we also did. Check out this page from the old german D & W cataloq from early '90's
Does the front splitter look familiar?
Check out this picture taken from Markus' 951. Front splitter is made by our "gang" and sideskirts are Strosek.
Like Jussi wrote, they are TSW Montages. They were installed under Pete's superb 951 just for that show. My another friend have those with his track tires. Those wheels are quite light. They are available also with black center, just a little bit like old Fuchs wheels. One of our friend have that kind of Montages under his 951. I can ask him some photoes, unless Jussi have some available?
I am not allowed to advertised here, but if i have them for sale, there is no sense to ship AIR type of splitter from Europe to the States. You get it much cheaper from AIR.
Does the front splitter look familiar?
Check out this picture taken from Markus' 951. Front splitter is made by our "gang" and sideskirts are Strosek.
What wheels are these?
Olli, do you have any mirrors and/or splitters for sale? I am interested in both.
#41
Former Vendor
Here's my custom made front splitter combining german splitter and british winglets...
I have just ordered the 968 turbo rs wiper deflector and mounted the 968 door handles and ordered some genuine, brandnew 993 turbo 9 / 1o inch magnesia hollow spoke wheels...so the car will be finished from the exterior point of view soon...
cheers
Beni
I have just ordered the 968 turbo rs wiper deflector and mounted the 968 door handles and ordered some genuine, brandnew 993 turbo 9 / 1o inch magnesia hollow spoke wheels...so the car will be finished from the exterior point of view soon...
cheers
Beni
#43
Jane Bond 007
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#44
I think this is the car Olli mentioned, too bad I don't have better pictures of it (because I'm thinking to buy those wheels also...).
(Sorry Kristian, stole your pic).
(Sorry Kristian, stole your pic).