dyno run video, open dump wg sound
07-18-2007 | 09:02 PM
Thread Starter
Joined: Aug 2004
Posts: 1,822
Likes: 0
From: seattle, washington - usa
dyno run video, open dump wg sound
here's the long awaited video. you can hear the wg open at around 33seconds;
http://video.google.com/videoplay?do...83714065185431
i didn't realize the car blew out that much smoke on WOT.
07-18-2007 | 09:04 PM
Joined: Sep 2004
Posts: 6,650
Likes: 1
From: Norwalk, CT
As our friend Borat would say.
"Very Niiiceeeeee"
07-18-2007 | 09:34 PM
Joined: Oct 2006
Posts: 629
Likes: 0
From: Orlando, Florida
Nice video...any numbers?
07-18-2007 | 09:36 PM
Thread Starter
Joined: Aug 2004
Posts: 1,822
Likes: 0
From: seattle, washington - usa
the rpm reader on the dyno wouldn't work, due to some electro/radio interference issues. it was around 320whp though.
07-18-2007 | 09:41 PM
Joined: Apr 2006
Posts: 364
Likes: 0
From: Raleigh, NC
Wow that is alot of smoke. You dont burn alot of oil do you? Car sounds great though!
07-18-2007 | 09:45 PM
Thread Starter
Joined: Aug 2004
Posts: 1,822
Likes: 0
From: seattle, washington - usa
i burn about a quart of oil every 800 miles or so, depending on how often i go WOT.
i also think it's time to replace the oil pan gasket.
07-19-2007 | 02:24 AM
Joined: Sep 2005
Posts: 5,107
Likes: 2
From: San Francisco
NICE! What did you do to plug the hole in the testpipe? Or do you have a lindsey/speedforce with no tie in? Is that a lindsey single port wastegate?
07-19-2007 | 03:38 AM
Thread Starter
Joined: Aug 2004
Posts: 1,822
Likes: 0
From: seattle, washington - usa
it's a lindsey 3" exhaust with magnaflow straight-through muffler. i just put a cap on the wg tie-in and clamped it on to block the hole.
07-19-2007 | 03:43 AM
Joined: Sep 2005
Posts: 5,107
Likes: 2
From: San Francisco
Ok, thanks. Could I please have a pic when you have the time?
07-19-2007 | 03:55 AM
Joined: Mar 2007
Posts: 2,623
Likes: 1
From: Atlanta, GA
Sounds awesome, especially with the magnaflow. How loud is it in real life? Is it maneagable when not going WOT?
07-19-2007 | 04:02 AM
Thread Starter
Joined: Aug 2004
Posts: 1,822
Likes: 0
From: seattle, washington - usa
when not under full boost, it sounds like a normal car with a magnaflow muffler.
you can actually hear how it sounds when i'm shifting through to 4th gear before the WOT in that video.
07-19-2007 | 08:06 AM
Geaux Tigers!Rennlist Member
Joined: Jun 2001
Posts: 9,037
Likes: 41
From: Louisiana
07-20-2007 | 07:07 AM
Monkeys Removed by RequestLifetime Rennlist Member
Joined: Feb 2003
Posts: 7,713
Likes: 1
From: New York
Quote:
Originally Posted by nize
the rpm reader on the dyno wouldn't work, due to some electro/radio interference issues. it was around 320whp though.
me likes...........me likes alot
07-20-2007 | 09:00 PM
Joined: Feb 2007
Posts: 722
Likes: 1
Love it! Magnaflow does a great job. Wastegate dump looks really neat too.
Any news on your temp sensor?
07-20-2007 | 10:08 PM
Joined: Sep 2005
Posts: 708
Likes: 0
From: Sammamish, WA
was this a dyno group day or did you jsut head down there for your car? May want to check you new turbo oil lines... that is alot of smoke.