Hello everybody

I have the occasion to buy a 944 2.7 liters (in France)
How I can verify if the head is really a 2.7L (Just with photos )
(I have photos but I cannot put a link)

Have you any photos of 2.7L motor ?

Thank you very much

Punchy

 

Which one is your intake port?

 

Thans "special tool"

Yes I now the oval port but the bloc is not "open", it's in the car.

(And the car is far from my home, I have just some photos)

In my memory the Intake manifold was diferente (944L and 944 2.7L)

Any photos of the Intake manifold ?

 

send me the pictures of the engine

artisticmason@comcast.net

 

Email send

 

Wow - this is a rough picture.
What year is this car?

 

Its a little dusty and dirty.

 

Tanks "special tool" for the picture

For the year, the vendor said me 86 but it's not possible, 89 I tink.
I can see the plug for "ABS"
180000 Km / 111000 Miles

The car have a shock on the front and the end, the car is sold for parts

 

FWIW comparison this is an 89 2.7 engine

 

Ask for the VIN.

 

The water passage at the front of the head where the top radiator hose goes into the head:
2.5L: water passage sits back from the front edge of the motor about 1 inch
2.7L: water passage is flush with the front edge of the motor
Cannot tell from the pictures but if you can look at the motor in person, look for that.

From the picture, the water reservoir is from '89 as '88 still had the old style but I don't know for certain that late '88s did not come with the new style also.

Also the cap on the air filter housing where in '89 they got rid of that stupid hose that went to the belt covers.

 

Thanks a lot aribop



Yes the VIN it's OK

Thanks All ! I think now it's really a 2.7L